Items where Subject is "Technology > Mechanical engineering and machinery"

-

-, Avinder Singh (2020) Heat Conduction Solutions Using Gauss-Siedel Method. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

-, Kavintharan (2012) Case Study on Meltdown Process at Esterol Sdn. Bhd. Final Year Project (Other), Tunku Abdul Rahman University College.

A

Abdul Rahman, Abdullah Iman (2024) Development of a Miniature Wind Tunnel. Final Year Project (Diploma), Tunku Abdul Rahman University of Management and Technology.

Ang, Cheng Heng (2018) Design of Powered Knee Exoskeleton by TRIZ. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Ang, Choon Hwa (2018) Tomato Automation Cultivation System: Automatize Watering and Fertilizer Based on Sensory Information. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Ang, Edmund Er Wen (2020) Design of a Biomimetic Robotic Hand with Dexterous Grasping and Manipulation Capabilities. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Ang, Eng Han (2023) Effect of Width of Cut on Tool Wear for Ball Nose End Milling on STAVAX Material. Final Year Project (Bachelor), Tunku Abdul Rahman University of Management and Technology.

Ang, Kian Heng (2011) SCADA Development for FMS 200 Using Microsoft Visual C#. Final Year Project (Other), Tunku Abdul Rahman University College.

Ang, Man Lok (2024) Design and Frabrication of Automation-Ready Polar Collector Mechanism. Final Year Project (Diploma), Tunku Abdul Rahman University of Management and Technology.

Ang, Ruo Fan (2019) Design and Analysis on Performance of Chiller Barrel. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Ang, Xun Thern (2023) Synthesis and Additive Manufacturing of Hydroxyapatite Bone Scaffold Derived from Chicken Bones Calcined at 900°C. Final Year Project (Bachelor), Tunku Abdul Rahman University of Management and Technology.

Au, Wai Yee (2020) Investigation into the Potential Applications of 3D Printing Technology in Constructing Infrastructures. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

B

Balakrishnan, Suren (2023) Autonomous Food Waste Segregation Using Machine Vision and Delta Robot. Final Year Project (Diploma), Tunku Abdul Rahman University of Management and Technology.

Beh, Chien Yang (2017) Fabrication of Semi-powered Knee Exoskeleton. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Beh, Jun Jiing (2019) Computation of Reduction of Viscous Hydroplaning for A Low Speed Landing Case. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Bek, Kiah Hon (2011) Investigating Energy Loss of Flow Over Non-Smooth Surfaces in an Open Channel Flow. Final Year Project (Other), Tunku Abdul Rahman University College.

Bong, Hillary Syn (2020) Study of Cutting Technologies for Efficient Processing of Marble Stones. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Bong, Joo Siong (2020) A Study on Evaluating Machining Condition and Cutting Edge Radius to Improve Surface Roughness in Milling SUS316 Material. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

C

Ch'ng, Jia Hui (2016) Magnetic Powered Generator. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Ch'ng, Jun Pei (2016) Designing an Extendable Cutting Tool for Palm Oil Mill (Fabrication). Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Chai, Calyn Ju Ye (2018) Design and Development of a Mechanical Farmin Crusher. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Chai, Chang Shung (2019) Experimental Design of Passive Dynamic Vibration Absorber to Attenuate Broadband Vibration. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Chai, Cheng Wei (2023) Fingerprint Unlock System with Arduino. Final Year Project (Diploma), Tunku Abdul Rahman University of Management and Technology.

Chai, Guan Chi (2019) Search Target Swarm Robot Algorithm. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Chai, Hon Meng (2011) An Evaluation to Replace Induction Welding Technology in an Electric Resistance Welded (ERW) Pipe Manufacturing Industry. Final Year Project (Other), Tunku Abdul Rahman University College.

Chai, San Yong (2011) Design and Fabrication of Aluminium Sheet Metal Stamping Die (Lower Die). Final Year Project (Other), Tunku Abdul Rahman University College.

Chai, Sei Leong (2019) Computation of Load Factors due to Maneuver Speed of an Aircraft. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Chai, Song Yuan (2018) Design and Development of an Intelligent Pressure and Latency Based Bimodal Keypad. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Cham, Chee Yin (2020) Design of an Automated Storage System. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Cham, Chung Lek (2020) Study of Filament’s Polymer Composites to Increase Mechanical Properties of the Material for Additive Manufacturing. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Chan, Chung Seng (2011) Design and Fabrication of Automated Feeding System for Forming Die. Final Year Project (Other), Tunku Abdul Rahman University College.

Chan, Eddie Chun Ti (2018) A Study on Chattering in Edu-Lathe CNC Turning Machine. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Chan, Fong Sing (2013) Automation of LFF2 EMC Cover & Shield Assembly Machine (Work Piece Assembly) in Sensata. Final Year Project (Other), Tunku Abdul Rahman University College.

Chan, Jackie Choon Bok (2012) Design to Improve Air Suspension System & Leaf Suspension System by Using Finite Element Modelling and Simulation. Final Year Project (Other), Tunku Abdul Rahman University College.

Chan, Jin Shing (2016) A New Design of Slide Button Mechanism for Chromatic Harmonica. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Chan, Ka Yap (2020) A Study on Optimizing Feed Rate and Cutting Depth to Improve Tool Performance in Milling SUS316 Material. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Chan, Kee Sum (2016) Design and Development of an Engineering Application Control Using Brain Signal. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Chan, Min Shen (2023) Automated Solar-Powered Misting System. Final Year Project (Diploma), Tunku Abdul Rahman University of Management and Technology.

Chan, Wei Heng (2023) Face Recognition for Kindergarten Security Application. Final Year Project (Bachelor), Tunku Abdul Rahman University of Management and Technology.

Chan, Yiee Tiee (2011) Design and Fabrication of an Automated Marker Pen Refill Machine (Fabrication). Final Year Project (Other), Tunku Abdul Rahman University College.

Chan, Yiing Herng (2016) Simulation of Dry Bulk Tanker. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Chan, Yik Mun (2020) Evaluation of Cutting-Edge Radius for Milling of P20 Steel to Achieve Optimal Tool Wear. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Chang, Chee Wah (2020) Augmented Reality in 3D Printing. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Chang, Chin Hoe (2011) Design Fabrication of a Corn Seeding Machine. Final Year Project (Other), Tunku Abdul Rahman University College.

Chang, Choon Zheng (2024) A Numerical Study of Plate-Fin Heat Sink Cooling by Fractal Induced Turbulence. Final Year Project (Bachelor), Tunku Abdul Rahman University of Management and Technology.

Chang, Jer Lui (2011) Stress and Microstructure Analysis of Parabolic Spring for Automotive Application. Final Year Project (Other), Tunku Abdul Rahman University College.

Chang, Jew Hang (2019) Goal-oriented Navigation System with Artificial Intelligence based Real Time Obstacle Detection. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Chang, Yong Soon (2012) Fabrication of Bladeless Light Fan. Final Year Project (Other), Tunku Abdul Rahman University College.

Chau, Mun Seng (2013) Design and Fabrication of an Automated Can Crusher System (Design and Fabrication). Final Year Project (Other), Tunku Abdul Rahman University College.

Chea, Koh Wei (2019) Application of Different Controller and Magnetorheological (Mr) Damper in Semi Active Suspension System. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Cheah, Yuen Kei (2021) Numerical Analysis of the Energy Dissipation due to Hydraulic Jump in an Inclined Open Channel Flow. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Cheak, Juin Jett (2020) Aerodynamic Analysis on Front Wing of F1 in Schools™ Car. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Cheang, Cheow Bin (2011) Plastic Injection Moulding (Design and Fabrication of Slide Core, Ejection System and Cooling System). Final Year Project (Other), Tunku Abdul Rahman University College.

Chee, Kah Wai (2023) Fingerprint Security Lock with Arduino. Final Year Project (Other), Tunku Abdul Rahman University College.

Chee, Ler Yin (2023) Design of Transport Mechanism and Mechanical Assembly of a Loose Fruit Collector for Oil Palm Industry. Final Year Project (Bachelor), Tunku Abdul Rahman University of Management and Technology.

Chee, Wei Yau (2022) Design of Plastic Frame for Primary Filter for a Manufacturing Industry. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Chen, Chiu Lok (2020) Computation of Decision Making on Emergency Landing Due to Loss of Engine. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Chen, Chor Yuen (2011) A Study on Implementation of Laser Cutting Technology In A Manufacturing Company. Final Year Project (Other), Tunku Abdul Rahman University College.

Chen, Siong Hui (2023) Design and Development of Portable Vertical Axis Wind Turbine. Final Year Project (Other), Tunku Abdul Rahman University College.

Cheng, Tian Shing (2011) Self Balancing Scooter. Final Year Project (Other), Tunku Abdul Rahman University College.

Cheok, Kai Xyan (2023) Design and Development of a Portable Shopping Carrier. Final Year Project (Other), Tunku Abdul Rahman University College.

Cheon, Shao Yuan (2023) Design and Development of Tire Traction Aids. Final Year Project (Other), Tunku Abdul Rahman University College.

Cheong, Cheng Fai (2018) Design of Wide Band Passive Vibration Absorber. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Cheong, How Meng (2020) Design and Optimization of Disk Brake by Finite Element Analysis. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Cheong, Wan Xiong (2019) Validity of Human Sensitivity of Comfort Reactions According to ISO2631. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Cheong, Willie Hang Yang (2011) PIC Controlled Self-Erecting Rotary Inverted Pendulum (Mechanical and Electrical Design). Final Year Project (Other), Tunku Abdul Rahman University College.

Cher, Chia Xing (2023) Aerodynamic Study of Different Nose Cone Designs at Different Mach Number Flow Regimes. Final Year Project (Bachelor), Tunku Abdul Rahman University of Management and Technology.

Cher, Wei Sheng (2022) Design and Analysis of Modified Super Twisting Sliding Mode Controller for Single Axis Positioning System. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Chew, Jordan (2022) The Classification of Alzheimer's Disease Using Artificial Intelligence. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Chew, Kai Xuan (2024) Design and Development of Indoor NFT Vertical Hydroponics System with Image Processing Implemented. Final Year Project (Bachelor), Tunku Abdul Rahman University of Management and Technology.

Chew, Kar Heng (2018) Bird Flight Concept Onto Human Travel Kit. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Chew, Keng Huat (2019) Integration of Production Lines via Manufacturing-Management Interface. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Chew, Kien Fai (2022) Design and Analysis of Adaptive PID for Cutting Force Compensation in Ball-Screw Drive System. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Chew, Poh Keng (2011) Design and Fabrication Plastic Injection. Final Year Project (Other), Tunku Abdul Rahman University College.

Chew, Simon Chun Kei (2024) Digital Twin for Robotic Arms. Final Year Project (Bachelor), Tunku Abdul Rahman University of Management and Technology.

Chew, Soon Yen (2011) A Study to Evaluate Alternative Technologies to Produce the Fastener in a Manufacturing Company. Final Year Project (Other), Tunku Abdul Rahman University College.

Chew, Wei Siong (2019) Project Dissertation Predictive Maintenance on Smart Welding Machine. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Chew, Yi Seng (2018) Social / Educational Robot to Improve Linguistic Skill for Toddlers Aged 5 to 6 Years old. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Chew, Ze Lin (2020) Data Analytics on SMT Mounter Machine with File Sharing. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Chia, Cheng Quan (2017) Heat Transfer Analysis of Non-Imaging Dish Concentrator Cooling System. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Chia, Kok Chin (2012) Design and Fabrication of an Automated Pancake Baking Machine. Final Year Project (Other), Tunku Abdul Rahman University College.

Chia, Wei King (2024) Design of Adaptive Controller for Disturbance Force Compensation in Machine Tools. Final Year Project (Bachelor), Tunku Abdul Rahman University of Management and Technology.

Chiah, Yu Shean (2024) Synthesis and Sintering Hydroxyapatite Derived from Bovine Bone Waste. Final Year Project (Bachelor), Tunku Abdul Rahman University of Management and Technology.

Chiam, Evon Sock Theng (2016) Falling Detection System based on Webcam with Raspberry Pi B+. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Chiang, Chung Chee (2016) Suppression of Noise on Brush Cutting Machine. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Chin, Chee Kang (2021) Thermal Analysis of Diesel Engine’s Piston with Integrated Cooling System. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Chin, Cheng Yu (2023) The Effects of Singing Bowl Sound Therapy on the Auras as Measured by Colourspace Visualizer. Final Year Project (Bachelor), Tunku Abdul Rahman University of Management and Technology.

Chin, Jia Dong (2020) Design of Transfemoral Prosthesis. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Chin, Jun Wei (2019) Anthropomorphic Multi-Fingered Robotic Manipulator for Kitchen Objects Grasping. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Chin, Ket Chun (2011) Design and Fabrication of Aluminium Sheet Metal Stamping Die (Upper Die). Final Year Project (Other), Tunku Abdul Rahman University College.

Chin, Khee Yuen (2021) Study on the Performance and Flow of Marine Propeller in Open Water with Computational Fluid Dynamics (CFD). Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Chin, Louis Chun Kai (2019) Investigation and Improvement of Posture Detection Algorithm and Its Implementation in Posture Rectification. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Chin, Lydia Khai Xin (2023) Automated Part Ejection System for 3D Printer. Final Year Project (Diploma), Tunku Abdul Rahman University of Management and Technology.

Chin, Zi Pin (2024) Arduino Smart Rubbish Bin. Final Year Project (Diploma), Tunku Abdul Rahman University of Management and Technology.

Ching, Weng Gui (2017) Design of Semi-Powered Knee Exoskeleton. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Chon, Chee Hao (2022) Convolutional Neural Network (CNN) Based Covid-19 Detection Using Chest X-Ray Image. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Chong, Chee Woei (2011) Prototyping Pulse Jet Engine on Air Fuel Inlet Analysis. Final Year Project (Other), Tunku Abdul Rahman University College.

Chong, Chen Hooi (2020) Design and Development of Pruning Shear Using Compliant Mechanism. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Chong, Hon Zhon (2011) Design and Fabricate Pick and Place Machine with Separation Function (Mechanical Design and Fabrication). Final Year Project (Other), Tunku Abdul Rahman University College.

Chong, Jayson Khai Yen (2011) Design and Analysis on Water Cooling System. Final Year Project (Other), Tunku Abdul Rahman University College.

Chong, Kah Loong (2018) Fabrication of Powered Knee Exoskeleton. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Chong, Ming Lun (2017) Modelling of an Active Suspension System for an Anti-Roll Bar in a Passenger Car. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Chong, Nocholas Lik Wen (2024) Design and Analysis of Nonlinear Cascade Controller for Cutting Force Compensation of Machine Tools. Final Year Project (Bachelor), Tunku Abdul Rahman University of Management and Technology.

Chong, Nyee Hao (2016) Design and Development of an Arduino®-based Intelligent Biometrics Identifier System to Recognize Individual Typing Patterns. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Chong, Qi Tat (2019) Anomaly Detection by Using Artificial Intelligence. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Chong, Qiao Jie (2023) Agriculture Monitoring and Irrigation System. Final Year Project (Other), Tunku Abdul Rahman University College.

Chong, Shi Leei (2018) Wheel selection guideline for Formula Students. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Chong, Shing Fatt (2013) Study on Air Crash Investigations Due to Electronics Instrument Failure Cases. Final Year Project (Other), Tunku Abdul Rahman University College.

Chong, Wai Jun (2023) Classification of Grape Leaf Diseases Using Convolutional Neural Network. Final Year Project (Bachelor), Tunku Abdul Rahman University of Management and Technology.

Chong, Wai Shing (2011) To Replicate the Design of a Collapsible Shipping Container. Final Year Project (Other), Tunku Abdul Rahman University College.

Chong, Yew Wei (2020) Sliding Mode Control on Photovoltaic System. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Choo, Edwin Keat Boon (2012) Design of Bladeless-Light Fan. Final Year Project (Other), Tunku Abdul Rahman University College.

Choo, Jia Wei (2020) Design and Fabrication of Forklift with Automated Guided Vehicle System. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Choo, Kee Juin (2017) Turning and Repositioning Bed for Patient (Positioning Control Mechanism). Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Choo, Wilbur Yee Rong (2023) Smartphone Mount with Shade Accessory for Motorbike Riders/Cyclists. Final Year Project (Other), Tunku Abdul Rahman University College.

Choo, Yao Jiun (2020) Design of Automated Can Lid Stacking System. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Choon, Yee Bin (2011) Design and Fabrication of Plastic Injection Mould (Cavity and Sprue System). Final Year Project (Other), Tunku Abdul Rahman University College.

Choong, Dick Phang (2018) Heat Transfer Simulation of Computer Chassis With Microcontroller Based Temperature Control. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Choong, How Sern (2018) Design, Fabrication and Integration of a Guided Rail Material Transfer System with Independently Driven Carriage. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Choong, Qian Kai (2022) Investigate the Impact on Deploying Photovoltaic Panel Roof against Indoor Temperature. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Choong, Wei Hong (2024) Vibration-Based Condition Monitoring for CNC Milling. Final Year Project (Bachelor), Tunku Abdul Rahman University of Management and Technology.

Chow, Chee Yuen (2023) Liquid Tank Level and Temperature Monitoring System with PLC and HMI. Final Year Project (Other), Tunku Abdul Rahman University College.

Chow, Horng Tzong (2011) Automated Pick and Place Machine with Separation Function. Final Year Project (Other), Tunku Abdul Rahman University College.

Chow, Jyi Shyan (2018) Efficient Wireless Powering Solution for Minirobot. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Chow, Weng Kang (2021) Design of Nonlinear Controller for Disturbance Suppression in Machine Tool. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Choy, Cheong Weng (2020) Cognitive Simultaneous Localization and Mapping. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Choy, Seong Chor (2020) Design an Automated Packaging System of Cold-Rolled Steel Product for Ajiya. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Chu, Ming Shen (2019) Evaluation of Cutting Edge Radius (CER) For Tool Wear in Milling DAC Material. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Chua, Chun Hao (2023) Aluminium Can Crusher Machine. Final Year Project (Diploma), Tunku Abdul Rahman University of Management and Technology.

Chua, Feng Wei (2011) Avoiding Stalling Effect Die to Failure of Flaps While Flying in Turbulence. Final Year Project (Other), Tunku Abdul Rahman University College.

Chua, Han Jie (2021) Design, Prototyping and Testing of Online Double Chlorination Gripper for Rubber Glove Manufacturing. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Chua, Heng Ming (2011) Design and Fabricate Automated Clothes Retrieval and Folding Machine. Final Year Project (Other), Tunku Abdul Rahman University College.

Chua, Ivan Ee Kin (2023) Portable Pro Power Jumper. Final Year Project (Diploma), Tunku Abdul Rahman University of Management and Technology.

Chua, Jing Xuan (2024) Optimization of Machining Parameters Using RSM Analysis in the Face Milling of STAVAX Material. Final Year Project (Bachelor), Tunku Abdul Rahman University of Management and Technology.

Chua, Jun Cheng (2017) Electric Aluminium Can Crusher. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Chua, Kang Long (2023) Local GUI Ordering System for OMIS Manufacturing Line. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Chua, Shyong Fei (2017) Effects of Diameter of Sound Holes and Their Positions on the Natural Frequencies of Soundboards. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Chua, Wee Xen (2011) A Prototype Pulse Jet Engine to Study the Exhaust Sizes Affect the Overall Performance. Final Year Project (Other), Tunku Abdul Rahman University College.

Chua, Yong Qian (2016) Simulation on Turbulence Intensity of Gasketed Plate Heat Exchanger. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Chuah, Wai Hooi (2022) Design and Simulation of Glove Packing System. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Chung, Hen Lee (2016) Design of Ball on Plate System Based Fuzzy Control Scheme. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

D

Devadas, Nicholas Emildas (2024) Finite Element Analysis of Thermal Properties of a Heat Sink Under the Influence of Fractal Turbulence. Final Year Project (Bachelor), Tunku Abdul Rahman University of Management and Technology.

Devandra, Aruldass (2019) Shoes That Detects Irregular Movements of the User. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Dong, Ching Ping (2011) Design and Fabricate of Wind Turbine (Blade and Frame Work). Final Year Project (Other), Tunku Abdul Rahman University College.

E

Eng, Hing Feng (2023) Drone Anti Collision System. Final Year Project (Bachelor), Tunku Abdul Rahman University of Management and Technology.

Eng, Jia Jun (2020) Experimental Analysis for Vibration Transmission from Angle Grinder to Hand-Arm. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Eng, Kai Sen (2024) Smart Light Switch with Arduino. Final Year Project (Diploma), Tunku Abdul Rahman University of Management and Technology.

Er, Hauchong (2012) The Design and Simulation of Disc Brakes. Final Year Project (Other), Tunku Abdul Rahman University College.

Ew, Stanley Kah Teng (2020) Design and Fabrication a Mobility Aid for the Disabled. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

F

Faun, Ke Xin (2024) Facial Expression Recognition for Robot Motion Control. Final Year Project (Bachelor), Tunku Abdul Rahman University of Management and Technology.

Ferdinand, Rio (2024) DIY Go Kart. Final Year Project (Diploma), Tunku Abdul Rahman University of Management and Technology.

Fock, Zhie Howz (2021) Numerical Analysis of the Comprehensive Performance of the Shell-and-Tube Heat Exchanger with Different Types of Baffles. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Fong, Hao Nan (2022) Integration of Artificial Intelligence with Computer Vision on Surface-Mount-Device's Fault Detection System. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Fong, Wai Yik (2013) Identification of Critical Success of Implementing Lean Manufacturing in SMI in Malaysia. Final Year Project (Other), Tunku Abdul Rahman University College.

Foo, Jen Lun (2020) A Study on Elimination of Tinplate Wicket Mark. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Foo, Tee Jui (2024) Smart Dustbin Using Arduino. Final Year Project (Diploma), Tunku Abdul Rahman University of Management and Technology.

Foo, Tuck Fei (2011) A Design Study to Mount Rubber Wear Bar and Liners onto a Dump Truck Body. Final Year Project (Other), Tunku Abdul Rahman University College.

Foo, Wei Jun (2020) Characterisation of Muscular Activities for Lower Extremities. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Foong, Jun Jie (2023) FEA in Automotive Chassis Design (Truck). Final Year Project (Bachelor), Tunku Abdul Rahman University of Management and Technology.

Francis Steward, Mclaren Stewart (2024) The Effect of Magnetic Field Intensity on the Ionic Flow and Its Convective Heat Transfer Over a Flat Surface. Final Year Project (Bachelor), Tunku Abdul Rahman University of Management and Technology.

Fun, Chun Keat (2011) Fabrication of Automated Cups Washer. Final Year Project (Other), Tunku Abdul Rahman University College.

G

Gan, Vim Huey (2011) Self-Regenerative Hybrid Bicycle. Final Year Project (Other), Tunku Abdul Rahman University College.

Gan, Yew Lun (2013) Automated Bending Machine in Everyday Brush Industries (M) Sdn Bhd (Electrical and Pneumatic Control). Final Year Project (Other), Tunku Abdul Rahman University College.

Gan, Zhihui (2021) Analytics and Monitoring for Virtual Factory Using Web Application. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Ganesaraja, Prakash (2022) The Effects of Flame Retardants on the Flammability of Oil Palm Fibre Filled Acrylonitrile Butadiene Styrene Composites. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Geh, Chia Sin (2016) Whole-Body Vibration Analysis of Baby Hammock. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Giam, Kee Teck (2020) Autonomous Robotic Arm with Human Interaction Capability. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Git, Jayson Twei Czhang (2013) Automation of Filter Assembly Machine (Load/Unload & Vision Inspection) in Sensata Technology (M) Sdn Bhd. Final Year Project (Other), Tunku Abdul Rahman University College.

Goh, Chi Khiong (2012) Fabrication of Automated Punch and Comb Binding Machine. Final Year Project (Other), Tunku Abdul Rahman University College.

Goh, Hui Siang (2021) Implementation of YOLOv4 to Perform Vehicles Detection and Counting Using Aerial Images of an Open Car Park. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Goh, Kah Chong (2012) Design Analysis of the Parabolic Leaf Spring using Finite Element Modeling and Simulation. Final Year Project (Other), Tunku Abdul Rahman University College.

Goh, Keat Chun (2020) Analyze and Control 2-Wheeler Auto Balance System. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Goh, Shu Wan (2018) Swarm Algorithm Target Seeking In Unknown Environment. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Goh, Tee Hon (2011) Design and Analysis of Automated Clothes Retrieval and Folding Machine. Final Year Project (Other), Tunku Abdul Rahman University College.

Goh, Tong Tai (2018) Parametric Study of Ultrasonic Pulses Type Park Distance Sensors. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Goh, Tze How (2012) The Design and Simulation of Drum Brakes. Final Year Project (Other), Tunku Abdul Rahman University College.

Goo, Li Jie (2018) Mechanical Analysis of Knee Joint under Different Load. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Goo, Sen Yang (2012) Fabrication of Baked Cake Machine for Food Industry. Final Year Project (Other), Tunku Abdul Rahman University College.

Gooi, Zhen Xiao (2019) Design and Development of Collision Warning Algorithm for Motorcycles and Bicycles by Using Ultrasonic Sensor. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Guek, Teng Tze (2018) Shortest Path Algorithm for Smart Parking System. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

H

Ha, Yvonne Yah Wen (2024) Effect of Doping Calcium Oxide Extracted from Eggshell on Hydroxyapatite Derived from Chicken Bone Food Waste. Final Year Project (Bachelor), Tunku Abdul Rahman University of Management and Technology.

Har, Chun Hong (2021) Developing a Basic Program for Aircraft Emergency Warning System with Predictive Threat Identification under Heavy Weather Disturbance. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Harunur Rashid, Muhammad Mizanur (2018) Mechanical Evaluation of Adjustable Shoe Soles for Anisomelia Patients. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Hau, Han Ming (2019) Heat Exchanger IoT Predictive Maintenance. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Hee, Sung Jack (2024) Optimization of Controller for a Cruise Control System. Final Year Project (Bachelor), Tunku Abdul Rahman University of Management and Technology.

Heng, Jit Yong (2022) Aerodynamic Analysis of 4-Element Front Wing of a Formula 1 Car Complying with the 2022 Formula 1 Regulations. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Hew, Chun Keat (2012) Intelligence Auto-Braking System. Final Year Project (Other), Tunku Abdul Rahman University College.

Hiew, Lee Wai (2022) Investigation of Different Types of Winglets Effects on the Lift and Drag Performance. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Hng, Chuan Boon (2011) Self-Regenerative Hybrid Bicycle. Final Year Project (Other), Tunku Abdul Rahman University College.

Ho, Elvis Yong Quan (2019) Analysis and Evaluation of the Acoustical Performance of an Internal Combustion Engine Exhaust Muffler. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Ho, Kee Yik (2019) Comprehensive Study of the Effects of Vibration Analysis of the difference between Manual and Auto Rocking of baby hammock. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Ho, Kian Fah (2013) Design and Fabrication of an Electric Powered Roller (Mechanical Design and Fabrication). Final Year Project (Other), Tunku Abdul Rahman University College.

Ho, Qing Kai (2012) Analysis on Compressed Air Engine Piston Head and Connecting Rod by Using Finite Element Method (FEM). Final Year Project (Other), Tunku Abdul Rahman University College.

Ho, Teck Hwa (2011) Design and Fabrication Evaporative Cooling System. Final Year Project (Other), Tunku Abdul Rahman University College.

Ho, Woei Loong (2018) Voice Recognition Improvement Using Kaiser Windowing Method. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Ho, Zhao Jun (2019) CNN-based Plant Growing Stage Classification. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Ho, Zi Cong (2022) Modal Analysis of Delaminated Flax Fibre Reinforced Epoxy Composite Plate. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Hoh, Zhao Quan (2019) LiDAR Based Obstacle Detection for Unknown Environment. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Hon, Mike Zhi Jie (2017) Design and Fabrication of a Hoyer Lift. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Hon, Mun Kit (2011) Design a Simple and Easy-To-Operate Electric Powered Wheelchair without Fanciful Gadgets. Final Year Project (Other), Tunku Abdul Rahman University College.

Hon, Wen Bin (2021) Mechanical Design and Analysis of Automobile Engine Supporting Bracket. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Hong, Clarence Wei Ying (2017) Design of an Active Suspension System for a MacPherson Strut in a Passenger Car. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Hong, Han Kee (2011) Self-Balancing Scooter (Mechanical Design and Analysis). Final Year Project (Other), Tunku Abdul Rahman University College.

Hong, Jia Xian (2023) Design and Analysis of an IOT-Based Monitoring Smart Water Cooling System for Photovoltaic (PV) Panels. Final Year Project (Bachelor), Tunku Abdul Rahman University of Management and Technology.

Hong, Ping Seng (2011) The Manufacturing Process of Steelmaking in a Company. Final Year Project (Other), Tunku Abdul Rahman University College.

Hoo, Shun Long (2020) Effect of 3D Printing Process Parameters on Mechanical Properties of Printed Part. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

How, Chong Keat (2023) Cutting Force Compensation Using Nonlinear Controllers in Milling Machine. Final Year Project (Bachelor), Tunku Abdul Rahman University of Management and Technology.

How, Weng Fong (2022) Analysis of Dynamic Characteristics of Francis Hydro-Turbine Main Shaft System. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

How, Yung Yip (2017) Semi-Automatic Rice Seeding Mechanism. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Huan, Shi Chun (2023) Alarm System for Home Security with Arduino Controller. Final Year Project (Diploma), Tunku Abdul Rahman University of Management and Technology.

Hwang, Boon Fei (2017) Characterization of Solenoid for Vibrational Energy Harvesting. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

J

Jeff, Lau On (2011) Electrically Assisted Human Powered Recumbent Tricycle (Development and Fabrication of Tricycle Frame and Steering Cycle). Final Year Project (Other), Tunku Abdul Rahman University College.

John, Joshua Ithayanathan (2020) Anthropomorphic 3-Fingered Robotic End-Effector with Force Feedback. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

K

Kam, Edwin Wei Hong (2011) Prototyping CPU Used Water Cooling System. Final Year Project (Other), Tunku Abdul Rahman University College.

Kam, Wei Hoong (2017) Mobile Automated Parking System (Structural Design Simulation and Mechanical Fabrication). Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Kang, Wen Xuan (2024) Vibration Reduction for Electric Grass Trimmer : Mitigating the Risk of Hand-Arm Vibration Syndrome. Final Year Project (Bachelor), Tunku Abdul Rahman University of Management and Technology.

Kang, Yan Sheng (2023) Tablets and Capsules Blister Pack Inspection. Final Year Project (Other), Tunku Abdul Rahman University College.

Kau, Chun Hou (2023) Construction of Prototype of Smart Automated Guided Vehicle (AGV) with Obstacle Avoiding Feature. Final Year Project (Diploma), Tunku Abdul Rahman University of Management and Technology.

Kau, Chun Shun (2023) Construction of Smart Metal and Non-Metal Waste Segregation System with IoT Features. Final Year Project (Diploma), Tunku Abdul Rahman University of Management and Technology.

Kee, Chia How (2020) A Study on Optimizing Different Cutting Conditions Using Different Cutting Tools to Reduce Delamination in Drilling Kenaf Polymer Composite. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Keong, Le-Onn (2018) Topology Analysis of Bicycle Rim Brake Pad to Improve Braking Performance. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Kham, Kai Wen (2023) Two-Step Sintering and Mechanical Testing of Hydroxyapatite Derived from Chicken Bone Biowaste. Final Year Project (Bachelor), Tunku Abdul Rahman University of Management and Technology.

Kheng, Chun Tatt (2012) Wind Tunnel Experiment on Aerofoil Body and C++ Programming on Calculating the Related Forces (Experiment And Programming). Final Year Project (Other), Tunku Abdul Rahman University College.

Kho, Kian Hao (2024) Design of Solar Mist System for Reducing Vehicle's Cabin Temperature. Final Year Project (Bachelor), Tunku Abdul Rahman University of Management and Technology.

Khong, Chi Hong (2013) Design and Fabrication of an Electrical-Powered Tricycle (Body Frame, Pedal Drive Train, Suspension, Steering). Final Year Project (Other), Tunku Abdul Rahman University College.

Khoo, Edmund ChengQin (2011) Smart Multi-functional Home. Final Year Project (Other), Tunku Abdul Rahman University College.

Khoo, Han Xian (2022) Vertical and Horizontal Integration of Manufacturing Line in the Context of Rami Industry 4.0. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Khoo, Kai Liang (2024) Design and Analysis of an Acoustic Enclosure with Enhanced Heat Dissipation and Noise Suppression for Motor. Final Year Project (Bachelor), Tunku Abdul Rahman University of Management and Technology.

Khoo, Lik Kai (2020) Study on Aerodynamic Characteristics of Curved Trailing Edge Wing of NACA 4412 Aerofoil. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Khoo, Teng Joon (2020) Design and Development of Surgical Gripper Using Compliant Mechanism. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Khoo, Vincent Khai Jie (2020) Identification of Plant Leaves Diseases Using Machine Learning. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Khoo, Yoke Ling (2020) Design of a Plastic Handle for Metal Container. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Khor, Chu Hock (2020) Computation of the Effect of the Flaps Positions in Achieving Optimum Rate of Descent. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Khor, Jian Sheng (2023) Plantation Object Identification and Counting. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Khor, Li Qin (2017) Autonomous Fire Extinguisher Robot in Laboratory Environment. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Khor, Shao Han (2019) Development of smart master planning schedule for Hotayi. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Ko, Chiak Kang (2012) Design and Fabrication of a DPS-Curve Oven Conveyor System at Sensata Technologies Malaysia Sdn. Bhd. (CAD). Final Year Project (Other), Tunku Abdul Rahman University College.

Koay, Kin You (2022) Design and Simulation of Motorised Paediatric Gait Trainer. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Koed, Jiazhin (2022) Vibration and Acoustics Characterization of Singing Bowls. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Koh, Chun Wei (2012) Intelligence Automatic Braking System (IABS) Mechanism Design. Final Year Project (Other), Tunku Abdul Rahman University College.

Koh, Jia Ming (2011) Voice-controlled Robotic ARM (Mechanical Part Designing). Final Year Project (Other), Tunku Abdul Rahman University College.

Koh, Kiat Huang (2020) Generate Procedure for Control and Setup of Delmia Using Excel VBA. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Koh, Wan Tong (2013) Object Tracking System Based on Optical Flow. Final Year Project (Other), Tunku Abdul Rahman University College.

Koh, Xing Yong (2016) Design and Development of Facial Recognition System of Indoor Images. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Koit, Weng Hin (2024) Effect of Doping Calcium Oxide Extracted from Eggshell on Hydroxyapatite Derived from Bovine Bone Food Waste. Final Year Project (Bachelor), Tunku Abdul Rahman University of Management and Technology.

Kok, Jin Hao (2021) Roll Forming Analysis (3D Isotropic Simulation). Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Kok, Ken Wai (2022) Design of a Loading and Sorting System in Timber Industry Using Simulation Software. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Kok, Wei Cheng (2021) Design of Tracking System for Photovoltaic Solar Panel. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Kok, Yin Hoo (2011) Case Study on Avoiding Stalling Effect Due to Failure of Flaps While Flying in Storm. Final Year Project (Other), Tunku Abdul Rahman University College.

Kong, Isaac Lian Ung (2016) Milling Titanium Alloy with Best Cutting Conditions for Lower Cutting Forces & Better Surface Roughness. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Kong, Kein Fei (2020) Detection of Weld Imperfection Based on Vibration-Based Method. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Kong, Mun Chun (2024) Robust Controller Design for Compensation of Disturbance in Machine Tools. Final Year Project (Bachelor), Tunku Abdul Rahman University of Management and Technology.

Koo, Kong Wai (2011) Design a Screw Sorter System with Specific Sizes. Final Year Project (Other), Tunku Abdul Rahman University College.

Kor, Yann Shen (2021) Liquid Droplets Dispersion Modelling of COVID-19 Carrier in a Confined Space with Minimal Airflow. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Ku, Chong Wei (2011) Mechanical Design and Fabrication of Hybrid Wheel-Legged Robot. Final Year Project (Other), Tunku Abdul Rahman University College.

Ku, Hau Siong (2016) Semi-Automated Multipurpose Vegetable Slicing Machine. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Kuan, Win Zhin (2018) Study on the Optimization of Cutting Condition During Turning of Mild Steel Using Carbide Cutting Tool. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Kuek, Ken Yee (2012) Design and Fabrication of a DPS-Cure Oven Conveyor System at Sensata Technology Malaysia Sdn. Bhd. (Conceptual Design). Final Year Project (Other), Tunku Abdul Rahman University College.

Kumar, B. Thinesh (2024) Visible Light Positioning with LED and Camera. Final Year Project (Bachelor), Tunku Abdul Rahman University of Management and Technology.

Kwan, Soon Leong (2024) Computational Fluid Dynamics (CFD) Analysis on Aerodynamics of Vehicle. Final Year Project (Bachelor), Tunku Abdul Rahman University of Management and Technology.

Kwong, Nicholas Hann (2024) Design and Fabricate of Sun Tracking System for Solar Panel. Final Year Project (Bachelor), Tunku Abdul Rahman University of Management and Technology.

Kyu, Ping Xian (2019) Design and Fabrication of a Stair-Climbing Wheelchair. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

L

Lai, Ban Seng (2018) A Study on Control of Weld Distortion in Mig Welding. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Lai, Joon Rung (2024) Development of Sustainable Healthcare Products Using Recycled Material. Final Year Project (Diploma), Tunku Abdul Rahman University of Management and Technology.

Lai, Kah Hoe (2011) Wireless Glass Break Detector. Final Year Project (Other), Tunku Abdul Rahman University College.

Lai, Weng Hao (2020) Automated Manufacturing System for the Production of Metal Door Frame. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Lai, Xing Zheng (2017) Analysis of Rotorcraft Lift Force. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Lai, Yu Jian (2023) Wireless Hand Gesture Controlled Smart Wheelchair. Final Year Project (Diploma), Tunku Abdul Rahman University of Management and Technology.

Lai, Zhao Yang (2023) Mini Speech Recognition Security/Room Lock. Final Year Project (Other), Tunku Abdul Rahman University College.

Lam, Jing Yi (2024) Design a Rolled Galvanized Iron Profile for Pre-Filter Frame. Final Year Project (Bachelor), Tunku Abdul Rahman University of Management and Technology.

Lam, Joe Yan (2012) Design of Automated Machine in Upper Seal Process of Sensata Technologies Malaysia Sdn Bhd. Final Year Project (Other), Tunku Abdul Rahman University College.

Lam, Yeap Sheng (2020) Design and Development of Umbrella Using Compliant Mechanism. Past Year Question Paper (Unpublished)

Lau, Ching Yee (2020) Design of Vortex Tube for Application on Vending Machine. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Lau, Chuen Wei (2011) Design of Automated Cups Washer. Final Year Project (Other), Tunku Abdul Rahman University College.

Lau, Finnian Jun Xi (2024) Design and Fabrication of Concentrated Photovoltaic (PV) Panel. Final Year Project (Bachelor), Tunku Abdul Rahman University of Management and Technology.

Lau, Jun Yong (2017) Analysis of Pipe Vibration. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Lau, Kai Xian (2019) Audio-visual Speech Recognition. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Lau, Ngie Tung (2011) Design Analysis of a Dump Truck Body. Final Year Project (Other), Tunku Abdul Rahman University College.

Lau, Pei Shan (2020) Numerical and Graphical Solutions on Distances of Gliding Motions. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Lau, Pui Yean (2016) Semi-Automatic Multipurpose Vegetables Slicing Machine. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Lau, Vincent Whye Hong (2011) An Analysis and Prototype on Alternate Flight-direction Control Solution for Coanda Craft based on GFS-UAV. Final Year Project (Other), Tunku Abdul Rahman University College.

Lau, Yik Hang (2022) Design of Automated Feeder to Power Press Machine. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Law, Chin Foon (2020) Damage Detection for Small Crack on Cantilever Beam with Normalized Natural Frequency. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Law, Wei Hong (2016) Investigation of Wind Turbine using CFD. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Law, Yit Chuan (2023) Design of Intelligent PID Controller for Cutting Force Compensation in Machinery. Final Year Project (Bachelor), Tunku Abdul Rahman University of Management and Technology.

Lee, Bing Xuan (2024) Solar-Powered Hydroponics Irrigation System. Final Year Project (Diploma), Tunku Abdul Rahman University of Management and Technology.

Lee, Chan Meng (2011) Design and Fabrication of Wind Turbine (Power Conversion). Final Year Project (Other), Tunku Abdul Rahman University College.

Lee, Chee Sin (2017) Process Optimization on Mechanical Properties of Ceramic for Hip Implant Application. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Lee, Chee Wai (2020) A Study on Evaluating Cutting Condition and Cutting Edge Radius to Improve Tool Performance in Milling SUS 316 Material. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Lee, Chew Aun (2020) Operational Research Methodology on Master Schedule Planning for Surface-Mount Technology Line. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Lee, Chun Hoe (2012) Design and Fabricate an Integrated Spray Painting Conveyor System. Final Year Project (Other), Tunku Abdul Rahman University College.

Lee, Chun Wai (2024) Design and Fabrication of Universal Soft Robotic Gripper. Final Year Project (Bachelor), Tunku Abdul Rahman University of Management and Technology.

Lee, Eng Kui (2023) Design and Fabrication of a Fixture for Bearing Housing Outer Surface Finishing. Final Year Project (Other), Tunku Abdul Rahman University College.

Lee, Eric Wei Chun (2018) A Study on Comparison of Tool Wear and Chip Formation during Milling for 5083 Aluminium and S275JR Mild Steel. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Lee, Guo Jing (2018) Stability Analysis on Self Tuning Fuzzy PI-PD Controller. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Lee, Hao-Ern (2020) Design of Advanced Control Algorithm for Quadcopter. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Lee, Heng Siang (2022) A Study to Increase Oil Extraction Rate (OER) of Palm Oil Mill. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Lee, Hong De (2011) Fabrication on Air Rotor System. Final Year Project (Other), Tunku Abdul Rahman University College.

Lee, Hong Zhen (2020) Rain Noise Reduction of Corrugated Rooftop Using Structural Modification Method. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Lee, How Teck (2024) Integrated and Simulation of Automated Guided Vehicle (AGV), Robotic Arm, Automated Storage and Retrieval System (ASRS) in Urban Farming. Final Year Project (Bachelor), Tunku Abdul Rahman University of Management and Technology.

Lee, Ivan Yi Boon (2021) Conductive Nanocomposite Hydrogel for Potential Applications in Medical Field. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Lee, Jia Fei (2020) Humanoid Social Robot for Interaction with Autistic Children. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Lee, Jia Han (2022) Design of a Fresh Air Ventilation System with VR Technology for a Chamber. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Lee, Jia Joon (2020) Stress Analysis on Mounting Structure Due to Wind Loading in Solar Photovoltaic Farm. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Lee, Jia Wen (2013) Arduino Based Multi-Colours Line Following Module with Calibration. Final Year Project (Other), Tunku Abdul Rahman University College.

Lee, Jia Yi (2011) To Construct a Generator to Produce Electricity Using Wave Energy Created by a Wave Generator. Final Year Project (Other), Tunku Abdul Rahman University College.

Lee, Jin Khoon (2018) A study on Optimum Cutting Condition to reduce Surface Roughness in Milling Aluminium using Carbide tool. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Lee, Kar Poh (2011) Controllable Temperature Sensor with Xbee. Final Year Project (Other), Tunku Abdul Rahman University College.

Lee, Khai Sheng (2018) Optimization of Self-Tuning Fuzzy PI-PD Controller Using Genetic Algorithm. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Lee, Kian Siong (2011) Movement Balancing Hexabot (Electronics Parts and Designing on Mechanical Parts). Final Year Project (Other), Tunku Abdul Rahman University College.

Lee, Kok Wai (2020) Design and Fabrication of Footstep Power Generator. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Lee, Lit Phin (2019) Effect of 3D Printing Process Parameters on Mechanical Properties of Printed Parts. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Lee, Nelson Lawrence Zhi Shien (2017) Windshield Air Jet Nozzle. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Lee, Peng (2023) OMIS Manufacturing Line Alternative Cloud Based Ordering System. Final Year Project (Bachelor), Tunku Abdul Rahman University of Management and Technology.

Lee, Perng (2021) Single-Sample Face Recognition for Attendance Record. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Lee, Seng Cang (2011) To Replicate the Working Mechanism of Pneumatic Vacuum Elevator. Final Year Project (Other), Tunku Abdul Rahman University College.

Lee, Soon Yee (2017) Wireless Wheelchair with Hand Gesture Control. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Lee, Veexian (2023) Biomechanical Analysis of Lateral Movements in Casual Badminton Player. Final Year Project (Bachelor), Tunku Abdul Rahman University of Management and Technology.

Lee, Wing Kiat (2020) Computational Fluid Dynamic Analysis on Thermal Energy Storage Tank for District Cooling Plant Operation Analysis. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Lee, Xian Chen (2024) Optimization of Printing Parameters for Enhanced Performance of a 3D-Printed Compliant Gripper. Final Year Project (Bachelor), Tunku Abdul Rahman University of Management and Technology.

Lee, Yi Bin (2019) Development of American Sign Language Recognition System Using Convolution Neural Network. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Lee, Ying Chien (2011) Designing Flight Evaluation and Simulation for UAV for the Purpose of Training the Operations. Final Year Project (Other), Tunku Abdul Rahman University College.

Lee, Yit Chang (2023) Design of Robust Controller for Cutting Force Compensation in Milling Table. Final Year Project (Bachelor), Tunku Abdul Rahman University of Management and Technology.

Lee, Yu Li (2024) Design and Development of EfficientNet for Traffic Sign Recognition. Final Year Project (Bachelor), Tunku Abdul Rahman University of Management and Technology.

Lee, Ze (2022) Design of Vortex Generators in Drag Reduction of Aircraft’s Wings. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Lee, Zhou Yi (2018) Modal Analysis of Vertical Wind Turbine Blade. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Leng, Chit Tat (2021) Covid-19 Management Kit for Quarantine Center. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Leong, Heng Seong (2011) To Replicate the Design of the Guide Rail and Safety Aspects Required of a Pneumatic Vacuum Elevator. Final Year Project (Other), Tunku Abdul Rahman University College.

Leong, Seng Yee (2017) Low Power Consuming Exoskeleton Design That Mimics The Movement Of Arm. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Leong, Shye Yi (2023) Multi-Sensors Data Collection with Siemens IoT Gateway. Final Year Project (Diploma), Tunku Abdul Rahman University of Management and Technology.

Leong, Wai Kin (2021) Mechanical Design and Analysis of the 2-Arm Linkage of Backhoe. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Leong, Zhi Zheng (2024) Design and Simulation of Automobile Active Suspension Control System. Final Year Project (Bachelor), Tunku Abdul Rahman University of Management and Technology.

Leow, Wei Qian (2019) Real Time Mobile Robot Route Map Plan. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Liao, Kah Lerk (2018) A Study on Surface Roughness and Tool Wear on Mild Steel Using Different Coated Carbide Tools. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Liaw, Jun Jie (2019) Design and Fabrication of Packing Station. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Liaw, Owen Ken Hua (2022) Design and Simulation of an Automated Wood Plank Processing System. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Lien, Wei Lun (2012) Design An Integrated Painting Conveyor System By PLC. Final Year Project (Other), Tunku Abdul Rahman University College.

Liew, Ching Ching (2023) Design of 2D Spring for Lower Extremities Exoskeleton. Final Year Project (Bachelor), Tunku Abdul Rahman University of Management and Technology.

Liew, Chow Hoe (2022) Development of an IOT Based SCADA System for a Chemical Manufacturing Plant. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Liew, Jin Hoong (2023) Smart Greenhouse Monitoring and Irrigation System. Final Year Project (Diploma), Tunku Abdul Rahman University of Management and Technology.

Liew, Jun Cheng (2018) Application of Fuzzy PI-PD Controller in Semi Active Suspension System for a Passenger Car. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Liew, Tze Ken (2017) Optimization of Pneumatic-Actuated Vacuum Pumps for Surgical Smoke Evacuators. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Liew, Weng Keat (2023) Design of Real-Time Monitoring System for Milling Machine. Final Year Project (Bachelor), Tunku Abdul Rahman University of Management and Technology.

Liew, Zheng Jie (2018) Mechanical Design and Evaluation of Hand Free Crutch. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Liew, Zi Jun (2024) Advancing Image Processing Techniques for Human Energy Field Measurement During Sound Therapy. Final Year Project (Bachelor), Tunku Abdul Rahman University of Management and Technology.

Lim, Alan Jia Wei (2019) Simulation of Hydroforming Process in Pre-form Model Using ANSYS. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Lim, Carlson (2011) Designing and Evaluation of Flight Control Mechanical System for A 4.2 Airship for Limited Outdoor Application. Final Year Project (Other), Tunku Abdul Rahman University College.

Lim, Chee Foo (2013) Design and Fabricate of a Auto Mechanical Sprayer's Cart (Mechanical System Design and Fabricate). Final Year Project (Other), Tunku Abdul Rahman University College.

Lim, Chee Wei (2016) Design and Fabrication of Flow Visualization Table. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Lim, Chen Ann (2019) Validation and Modeling of Computational Fluids Dynamics for Vortex Induced Vibration. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Lim, Chen Chiet (2013) Automation of LFF2 EMC Cover & Shield Assembly Machine (Load/Unload) in Sensata Technologies (M) Sdn Bhd. Final Year Project (Other), Tunku Abdul Rahman University College.

Lim, Cheng Kin (2022) Case Study on Plank Processing Cycle. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Lim, Cheng Wei (2020) The Kinematics Study of a 7 DOF Serial Robotic Manipulator for Obstacle Avoidance Purpose. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Lim, Chieh Hsuan (2016) Experimental Modal Analysis of Baby Hammock. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Lim, Chong Yuan (2016) Speech Recognition Vending Machine. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Lim, Choon Hoong (2024) Shear Modulus Prediction from Modal Parameters of Shaft Under Cyclic Loading. Final Year Project (Bachelor), Tunku Abdul Rahman University of Management and Technology.

Lim, Chu Hang (2018) Depth Estimation of the Potholes With Stereo Machine Vision. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Lim, Chun Bin (2021) Design of a Semi-Automated O-Ring Assembly Machine. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Lim, Chun Boon (2016) Design, Fabrication and Test of Garlic Peeling Machine. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Lim, Cui Yuan (2019) Vehicle Safety Enhancement with Doppler Radar System. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Lim, Ee Vui (2011) Design and Fabrication of a Vortex Motion Apparatus (Mechanical Design). Final Year Project (Other), Tunku Abdul Rahman University College.

Lim, Ee Wei (2016) Speech Recognition for Smart Home. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Lim, Eng Hock (2020) Fully Automated Pick and Place Machine with a Scanner. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Lim, Han Sing (2024) Arduino Fingerprint Door Lock System with Alarm System. Final Year Project (Diploma), Tunku Abdul Rahman University of Management and Technology.

Lim, Hong Xuan (2024) Adaptive Controller Design for Cutting Forces Rejection in Machine Tools. Final Year Project (Bachelor), Tunku Abdul Rahman University of Management and Technology.

Lim, Hui Yan (2018) PID Controller Tuning Using Different Optimization Algorithms. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Lim, Jay Ming (2017) Real-Time Image Processing Based Obstacle Avoidance System and Navigation System in Uncertain Environment for Autonomous Wheelchair Application. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Lim, Jia Zheng (2019) Vortex Induced Vibration - Investigate on the VIV characteristics by changing afterbody length of a cylinder. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Lim, Jian Han (2023) Automated Time Capture for OMIS Line Stations. Final Year Project (Bachelor), Tunku Abdul Rahman University of Management and Technology.

Lim, Jian Hung (2022) Design and Development of Pedal Powered Water Pump. Final Year Project (Other), Tunku Abdul Rahman University College.

Lim, Jin Loong (2018) Study the Optimization of Different Cutting Tools Performance during Drilling KENAF Polymer Composite. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Lim, Jonathan Jie (2020) Design and Fabrication of a Continuous Passive Machine. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Lim, Jun (2018) Suppression of Noise Level of Canister Vacuum Cleaner. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Lim, Jun Hao (2022) UAS Visual-Based Human Detection (Drone the Surveillance). Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Lim, Kai Zhi (2019) Disturbance Compensation for Linear Drive System Using Inverse-Model Based Approach. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Lim, Kha Hoe (2018) Design, Fabrication and Integration of a Differential Wheeled Automated Guided Vehicle with Automated Loading System. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Lim, Kok Shie (2020) Study of Heat Profile in Anaerobic Reactor by Forced Convection Using Heating Element. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Lim, Kok Siong (2018) A Study of Infant Comfort Level in a Baby Stroller. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Lim, Kuan Kiat (2016) Vibration reduction of baby hammock. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Lim, Kwong Yung (2023) Design and Build a General Purpose Continuum Mobile Manipulator. Final Year Project (Bachelor), Tunku Abdul Rahman University of Management and Technology.

Lim, Nicholas Way Ho (2020) Simulation and Validation of a Surface Mount Technology Line Using Delmia Quest. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Lim, Pui Wan (2016) Water Landing Aircraft: Experimentation and Programming of Stability for the Floating Device (Flying Boat). Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Lim, Shan Pin (2023) Analysis of Mass Personalization Manufacturing with Industry 4.0 in the Production of Beverage. Final Year Project (Bachelor), Tunku Abdul Rahman University of Management and Technology.

Lim, Sze Jheng (2019) Design and Development of Wind Powered Mobile Charger. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Lim, Teik Hong (2016) Design And Fabrication Of A Wind Tunnel. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Lim, Wan Ni (2016) Aerodynamic Drag Reduction of Heavy Goods Vehicle. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Lim, Wei Buok (2024) Construction of Line Following Robot. Final Year Project (Diploma), Tunku Abdul Rahman University of Management and Technology.

Lim, Wei Giap (2023) IOT Based Automatic Plant Watering and Monitoring System. Final Year Project (Other), Tunku Abdul Rahman University College.

Lim, Wei Sheng (2016) Water Landing Aircraft: Experimentation and Programming of Stability for the Floating Device (Floatplane). Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Lim, Whey Hoong (2020) Design and Development of Low-Cost Wind Powered Motorcycle Mobile Charger. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Lim, Xian Zhu (2020) Non-Coordinate Robotic Arm Control. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Lim, Yit Shin (2024) IoT Solar Powered Air Quality Monitoring Device Using Arduino. Final Year Project (Diploma), Tunku Abdul Rahman University of Management and Technology.

Lim, Yit Yuan (2023) Design of Smooth Second Order Sliding Mode Controller for Motion Control of Machine Tools. Final Year Project (Bachelor), Tunku Abdul Rahman University of Management and Technology.

Lim, Yu En (2024) Automated Plant Care and Soil Health System. Final Year Project (Diploma), Tunku Abdul Rahman University of Management and Technology.

Lim, Yu-Quan (2018) Image Processing and Machine Learning Based Algorithms for Mammogram Analysis. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Lim, Ze Jun (2020) Computer Vision Based Sign Language Recognition System. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Lim, Zhi Xiang (2024) Area Segmentation of Large Palm Oil Plantations for UAV Path Planning. Final Year Project (Bachelor), Tunku Abdul Rahman University of Management and Technology.

Lim, Zi Cheng (2011) Design and Fabrication of a Shuttlecock Launcher. Final Year Project (Other), Tunku Abdul Rahman University College.

Lim, Zi Quan (2024) Passive Solar Still with Vacuum Pump. Final Year Project (Diploma), Tunku Abdul Rahman University of Management and Technology.

Lim, Zi Yi (2024) Design of Cooling System for Photovoltaic (PV) Panel. Final Year Project (Bachelor), Tunku Abdul Rahman University of Management and Technology.

Ling, Ai Loong (2013) To Develop a RS485 Communication Network Using PIC Microcontroller and Standard Serial Communication Protocol. Final Year Project (Other), Tunku Abdul Rahman University College.

Ling, Teck Joon (2013) Table-Top Computer Milling Machine (Mechanical Design). Final Year Project (Other), Tunku Abdul Rahman University College.

Ling, Tor Yao (2011) Design and Construction of Vacuum Engine (Design and Fabrication Part). Final Year Project (Other), Tunku Abdul Rahman University College.

Liong, Jun Yan (2020) Analysis and Design of Front and Rear Spoiler to Reduce Lift and Drag Force of Sedan. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Liu, Justin David Man Hin (2023) Fabrication of an Improved Bicycle Disc Brake System. Final Year Project (Diploma), Tunku Abdul Rahman University of Management and Technology.

Loh, Joe Yang (2022) Design of an Automated Plank Sorter. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Loh, Jun Han (2022) The Effect of Flame Retardants on the Mechanical Properties of Oil Palm Fibre Filled Acrylonitrile Butadiene Styrene. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Loh, Selina Xin Ci (2018) Automated Grading of Edible Birds Nest. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Loi, Choon Wei (2020) Design and Fabrication of Dual Turbine Hydropower Generator. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Loi, Choon Yip (2019) Modelling and fatigue analysis of automobile wheel rim. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Loke, Chun Hou (2018) Effect of Tool Shape on Machining Performance of Mild Steel in Turning Operation. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Loke, He Jiang (2017) Uncanny Valley: to Study the Acceptance of Malaysian Rural Population Towards Different Types of Robot Faces. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Loo, Hang Yang (2016) Automated CNC Lubrication System. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Loo, Jee Heng (2024) Design Smart Braking System Using Sensor Technologies. Final Year Project (Bachelor), Tunku Abdul Rahman University of Management and Technology.

Loo, Soon Sean (2013) To Design and Fabrication the Auto Mechanical Sprayer's Cart Using ISO 9001 QMS Requirement (Fluid System Design and Fabrication). Final Year Project (Other), Tunku Abdul Rahman University College.

Loo, Tze Peng (2019) Implementation of Active-anti Roll Bar Control System to a 3-axle Double-Decker Bus. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Looi, Kok Sheong (2013) Automated Clothes Drying Rack. Final Year Project (Other), Tunku Abdul Rahman University College.

Looi, Zheng Yang (2020) Algorithm of Flight Path Replication. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Look, Chee Kiet (2018) Optimization Factors Affecting the Cutting Quality and Hardness n Plasma Cutting. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Lourdes, Ronald James Patrick (2022) Enhancing the Lift and Drag Coefficients through an Integrated Thin NACA Airfoil Coupled with Surface Indentation Design. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Low, Chee Boon (2011) Design and Simulation of Vertical Axis Wind Turbine. Final Year Project (Other), Tunku Abdul Rahman University College.

Low, Guan Cheng (2024) Effect of Ball Milling on the Mechanical Properties of Hydroxyapatite Derived from Chicken Bone Food Waste. Final Year Project (Bachelor), Tunku Abdul Rahman University of Management and Technology.

Low, Han Liang (2022) Fractal Induced Turbulence and Its Effects on Plate-Fin Heat Sink Heat Transfer. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Low, Jie Zuen (2024) Design and Analysis H-Infinity Controller for Machine Tools. Final Year Project (Bachelor), Tunku Abdul Rahman University of Management and Technology.

Low, Jin Ken (2019) Study on the Air Flow Characteristics of the Ceiling Air Diffuser with Computational Fluid Dynamics (CFD). Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Low, Jiunn Jye (2017) Power Standing Electrical Wheelchair with Transfer Assist. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Low, Jun Heng (2016) Design and Installation of a Control Mechanism for an Automated Storage and Retrieval System. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Low, Kah Seng (2020) Design of Second Order Sliding Mode Controller Using Smoothening Method for Machine Tools. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Low, Kuan You (2020) Optimization of Master Schedule Planning for Surface-Mounted Technology Production Line. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Low, Lie Zhe (2021) Critical Analysis of the Readiness for Industry 4.0 Integration of Manufacturing Execution Systems. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Low, Raymond (2017) Uncanny Valley: To Study the Acceptance of Malaysian Urban Population Towards Different Types of Robotic Faces. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Low, Suk Yin (2024) Vibration and Acoustics Characteristic of Gong. Final Year Project (Bachelor), Tunku Abdul Rahman University of Management and Technology.

Low, Tak Wai (2011) Design and Fabrication of Vertical Axis Wind Turbine. Final Year Project (Other), Tunku Abdul Rahman University College.

Low, Ting Sheng (2018) SCARA Robot Kinematics And Simulation. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Low, Wai Yeap (2011) Critical Success Factors of ISO 9001:2008 Implementation in Eastern Soldar Engineering & Construction Sdn Bhd. Final Year Project (Other), Tunku Abdul Rahman University College.

Low, Wee Kiat (2018) Embedded Wearable Robotic Arm in Palm Oil Industry. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Low, Wei Jian (2018) Enhance Compressed Air Jet Streams to Aid Windshield Wiper. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Low, Yen Sau (2019) Productivity Study of a Pewter Tea Leaf Container Manufacturing Line. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Lum, Chee Hong (2023) Effect of Cutting Feed Rate on Surface Roughness for Ball Nose End Milling on STAVAX Material. Final Year Project (Bachelor), Tunku Abdul Rahman University of Management and Technology.

M

Mah, Choon Sing (2016) Modification of the Upper Deck of Car Carrier Trailer. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Mui, Kok Kiang (2012) Design Of An Automated Filling Machine (Fabrication of Prototype). Final Year Project (Other), Tunku Abdul Rahman College.

N

Nau, Jek Yee (2022) Development of a Visually Impaired Assistive Device. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Neo, Choon Hui (2021) Design and Development of a Physical Block Based Logical Programming Stem Educational Tool for Diploma Engineering Students. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Ng, Chee Ho (2018) Optimum CNN-based Plant Mutant Classification. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Ng, Chee Seng (2013) XBEE and Digital Compass for Child Care System. Final Year Project (Other), Tunku Abdul Rahman University College.

Ng, Cheong Leong (2011) Vehicle License Plate Recognition with MATLAB. Final Year Project (Other), Tunku Abdul Rahman University College.

Ng, Choo Er (2022) Design and Simulation for Automated Wood Plank Sorting System. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Ng, Chuan Kit (2018) Design of an Automatic Womb-like Baby Hammock for a Safe and Better Neonatal Growth. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Ng, Guo Hao (2022) Design of an Automated Log Loading System for Bandsaw at Sawmill. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Ng, Han Sheng (2012) Design Improvement By Weight Reduction Of The Housing of Portal Axle Unit Using Finite Element Modelling And Simulation. Final Year Project (Other), Tunku Abdul Rahman University College.

Ng, Jian Fei (2021) Numerical Analysis of Heat and Flow Profiles in Clean Room Design. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Ng, Jie Loong (2024) Smart Car Roof with Automated Water Sprinkler, Automated LED Light and Automated Hazard Detection Device. Final Year Project (Diploma), Tunku Abdul Rahman University of Management and Technology.

Ng, Jun Wei (2012) Design And Fabrication Of Plastic Injection Mould For Components Of A Diaphragm Pump (Part B: Cavity). Final Year Project (Other), Tunku Abdul Rahman University College.

Ng, Jung Hong (2020) Data Driven Prognostics and Diagnostics for SMT Machine Logs. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Ng, Kah Chun (2018) Fingerprint Recognition Algorithm Design Based on Single Fingerprint Reference Data. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Ng, Khai Sean (2023) Design of Wireless Power Charging Coil for LED Lighting (Simulation). Final Year Project (Bachelor), Tunku Abdul Rahman University of Management and Technology.

Ng, Kheng Hui (2017) Design of 3D Food Printer. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Ng, Ming Li (2023) Vision Based Hybrid CNN-LSTM Model for American Sign Language Recognition. Final Year Project (Bachelor), Tunku Abdul Rahman University of Management and Technology.

Ng, Pei Wen (2021) Preliminary Screening of the Influential Factors in Optic Nerve Head Biomechanics using Morris Method. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Ng, Phei Siang (2021) Optimization of Crankshaft Using Finite Element Analysis. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Ng, Shin Huan (2020) Design of Sliding Mode Controller for a Two Wheeled Balancing Robot. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Ng, Soo Chen (2016) Automated CNC Lubrication System. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Ng, Soon An (2019) Study of Filament’s Polymer Composites. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Ng, Tiong Yik (2013) Non-Debris Throw about Handheld Grass Cutting Machine. Final Year Project (Other), Tunku Abdul Rahman University College.

Ng, Wei Chuen (2023) AutomationML Integration of Manufacturing Line in the Context of RAMI Industry 4.0. Final Year Project (Bachelor), Tunku Abdul Rahman University of Management and Technology.

Ng, Yen Ming (2016) Drilling Titanium Alloy Grade 5 With Best Cutting Conditions For Lower Cutting Forces and Surface Roughness. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Ng, Yong Ting (2021) Design and Development of 3D Social Distancing Detection Module. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Ng, Yu Ming (2021) Design and Development of an Intelligent Vision System for Wiper Arm Defect Detection with Novel Tunnel Lighting System. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Ngai, Wen Jun (2018) Durability Analysis of a Vehicle Body Structure Using Finite Element Method. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Ngo, Xia Rui (2017) Clothes Drying equipment. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Ngu, Yu Zuan (2022) Optimum Stator Design for Vibration Reduction in Brushless DC Motor. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Ngueh, Eng Keong (2017) Design and Fabrication of a Lifting Device for Patient. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

O

Oh, Kai Jer (2021) A Study on Optimizing Cutting Condition and Parameters to Evaluate Tool Performance in Milling SUS316 Stainless Steel Material. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Oh, Lucas Loon Keat (2020) Modelling of the Human Body Under the Exposure to Recumbent Whole-Body Vibration. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Ong, Chong Kean (2023) Computational Fluid Dynamic (CFD) Analysis of Vortex Bladeless Wind Turbine. Final Year Project (Bachelor), Tunku Abdul Rahman University of Management and Technology.

Ong, Ee Jj (2011) Design and Fabrication of Wind Tunnel and Heat Transfer Study. Final Year Project (Other), Tunku Abdul Rahman University College.

Ong, Jia Wei (2019) Computational Fluid Dynamics (CFD) Study on Rate of Heat Transfer for an Air Side Heat Exchanger. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Ong, Kai Chuin (2021) Numerical Modelling of Uveoscleral Outflow Pathway in Aqueous Humor Drainage. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Ong, Kevin (2019) Road Handling Improvement Through Active Yaw Control System for Road Vehicle. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Ong, Khor Jin (2019) Evaluation of Toughness Of 0.2, 0.5 and 1.0 WT% CUO Doped Zirconia Using Different Methods. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Ong, Meng Chee (2019) Numerical Analysis on Damage Detection of Rail Using Lamb Wave. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Ong, Shu Sian (2018) Mechanical Evaluation of Dynamic Hip Screw (DHS) for Trochanteric Fracture. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Ong, Si Qing (2020) Analysis on Critical Factors of Survival Ditching Cases. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Ong, Teng Guan (2018) Image Processing Algorithm for Tomato Detection and Ripeness Classification. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Ong, Tian Liee (2017) Turning and Repositioning Bed for Patient (Turning Sheet, Roller and Side Rail Design). Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Ong, Ting Wee (2022) Operational Modal Analysis of Singing Bowls. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Ong, Wei Jye (2013) Design and Fabrication of a Hovercraft (Fabrication). Final Year Project (Other), Tunku Abdul Rahman University College.

Ong, Weng Kuan (2012) Design Of An Automated Filling Machine. Final Year Project (Other), Tunku Abdul Rahman University College.

Ong, Win Kent (2023) Deep Learning Approach for BSR Disease Detection of Oil Palm Tree Using RGB Image Analysis. Final Year Project (Bachelor), Tunku Abdul Rahman University of Management and Technology.

Ong, Zhao Wei (2021) Mechanical Design & Analysis of Holding Device for the Non-Contact Colour Measurement on an Inclined Moving Conveyor. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Onn, Yang Da (2021) An Investigation on the Influential Hydrodynamic Factors in Intraocular Pressure Elevation. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Ooh, Chee Seng (2017) Screw Separation Machine. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Ooi, Eric Chin Wei (2018) A Study of Tool Life and Surface Roughness for CNC Milling Machine Using Uncoated Carbide End Mill Tools in Dry Cutting Condition. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Ooi, Gin Wei (2019) A Study on Evaluating Surface Roughness Based on Cutting Parameters in Machining P20 Material. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Ooi, Jing Jie (2016) Design and Fabrication of a Drone to Solve Water Pollution. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Ooi, Kai Ping (2024) Inverse Kinematics Solutions Using Reinforcement Learning for a 6-dof Robotic Manipulator. Final Year Project (Bachelor), Tunku Abdul Rahman University of Management and Technology.

Ooi, Tzin Yung (2012) Object Tracking Remotely Operated Vehicle (ROV Control Algorithm). Final Year Project (Other), Tunku Abdul Rahman University College.

Ooi, Vei Cheik (2017) To Design and Fabricate an Automated Guided Vehicle (Electronics and Control). Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Ooi, Yao Sheng (2022) Design and Compare Dual-Axis Active Solar Harvesting System against Fix Mounted PV Panel. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Ooi, Yong Keat (2011) Design and Fabrication of Shuttlecock Launcher (Mechanical Design). Final Year Project (Other), Tunku Abdul Rahman University College.

Ooi, Zhe Sen (2019) Four Axis SCARA Robot Inverse Kinematics and Solution. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Oon, Yee Aun (2013) A Study on the Effect of Heat Treatment for Spring USed in the Machinery Part. Final Year Project (Other), Tunku Abdul Rahman University College.

Ow Yong, Hui Yan (2018) PID Controller Tuning Optimization with Genetic Algorithm for a Ball-Beam Balancing System. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

P

Pang, Jing Sen (2019) Reflection of Torsional T (0, 1) Guided Waves from Pipeline Corrosion. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Pang, Jun Sian (2016) Pumping Unit of Cement Plastering Machine. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Pang, Yik Siang (2017) Computational Fluid Dynamics (CFD) Simulation of Natural Gas Combustion. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Peck, Jian Ye (2023) Oil Skimmer for Civic Uses. Final Year Project (Diploma), Tunku Abdul Rahman University of Management and Technology.

Peng, Foo Guan (2021) Design and Simulation Compliance Mechanism for Lower Extremities Exoskeleton. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Phang, Xiao Qi (2020) Compliance Mechanics Design of Lower Extremities Exoskeleton. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Phoon, Zee Him (2018) Algorithm for Human-Robot Collaborative Tasks. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Phua, Sherlee (2018) Suppression of motorcycle handlebar vibration. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Phun, Kah Kitt (2023) A Study on Effect of Spindle Speed on Tool Wear for Ball Nose End Mill on STAVAX Material. Final Year Project (Bachelor), Tunku Abdul Rahman University of Management and Technology.

Poh, Kok Sheng (2017) Computation of Structure Properties of a C-Wing. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Poh, Ye Pin (2021) Optimisation of the Resistance and Seakeeping of the Planing Hull for the High-Speed Vessel Using ANSYS FLUENT. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Pong, Sheng Hau (2011) Using Computational Fluid Dynamics Software to Modify and Simulate a Waste-heat Boiler Design. Final Year Project (Other), Tunku Abdul Rahman University College.

Ponraj, Neil Navin (2024) Solar-Powered Smart Irrigation System for Sustainable Agriculture. Final Year Project (Bachelor), Tunku Abdul Rahman University of Management and Technology.

Pua, Kai Xuen (2023) Effect of Cutting Feed Rate on Tool Wear for Ball Nose End Milling on STAVAX Material. Final Year Project (Bachelor), Tunku Abdul Rahman University of Management and Technology.

Puan, Kai Teck (2022) A Study on the Impact of Application of Artificial Intelligence (AI) in the Malaysian Construction Industry. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Q

Quek, Sze Qi (2024) Vibroacoustic Analysis of Standing Bowls. Final Year Project (Bachelor), Tunku Abdul Rahman University of Management and Technology.

Quek, Wei Chiang (2020) Simultaneous Localization and Mapping Based Indoor Delivery Robot. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Qwek, Tao Wei (2011) Finite Element Analysis of a Failure in Ear-Mounted Mower Pulley. Final Year Project (Other), Tunku Abdul Rahman University College.

R

Raj, Noel Chris (2020) Design and Development of a Novel Approach to Cooling Systems in Domestic Households. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Raman, Dev Yakehim (2024) Improvisation of a Bicycle Brake Disc. Final Year Project (Diploma), Tunku Abdul Rahman University of Management and Technology.

Rudee, Roibol (2022) Design of an Indoor and Outdoor Gait Harness System for Stroke Patient Rehabilitation. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

S

S. Desikan, Thaswin Raj Pillai (2024) Microgreen Yield Prediction Under Different Lighting Conditions. Final Year Project (Bachelor), Tunku Abdul Rahman University of Management and Technology.

San, Zhen Yuan (2021) Optimization and Analysis of Various Design for Crane Hook Using Finite Element Analysis. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Sasitharan, Shawn Daren (2020) Development of SCADA IoT Embedded Windows System for Residential Photovoltaic Monitoring System. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Saw, Aik Wei (2016) Loose Fruit Collector for Palm Oil Industry (Simulation & Costing). Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Seah, Wei Jie (2024) Food Waste Classification System Using Artificial Intelligence. Final Year Project (Bachelor), Tunku Abdul Rahman University of Management and Technology.

See, Wee Wee (2013) Fabrication of Hydrogen Fuel Cell Generator. Final Year Project (Other), Tunku Abdul Rahman University College.

Seng, Fu Xiang (2024) Natural-Fiber Honeycomb Perforated Sandwich Panels with Wedges for Sound Insulation in Rooms. Final Year Project (Bachelor), Tunku Abdul Rahman University of Management and Technology.

Seng, Zan Xiang (2016) Water Landing Aircraft: Conceptual Design of The Floating Parts Of A Seaplane (Impact Factor). Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Seow, Chee Hoon (2022) Design of a Mechanism for Hole Detection on a Glove Production Line. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Seow, Kee Huei (2016) Design and Installation of a Labelling Dispensing Mechanism for Broomstick Labelling Machine. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Shaun, Anthony Stephen (2012) Design Improvement And Optimization Of The Car Sports Rim By Weight Reduction Using Finite Element Modelling And Simulation. Final Year Project (Other), Tunku Abdul Rahman University College.

Si, Cheng Thing (2013) Design and Fabrication of a Smart Egg Incubation System. Final Year Project (Other), Tunku Abdul Rahman University College.

Siah, Jian How (2021) Mechanical Design and Analysis of Multi-Functional Portable Patient Bed. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Siah, Johnny Chen Qiang (2022) A Study on the Design of M.2 SSD Heat Sink. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Siah, Kea Joe (2013) Design & Manufacture a Plastic Injection Product (Mold Design & Fabrication of Injection Mold) Part B. Final Year Project (Other), Tunku Abdul Rahman University College.

Siaw, Ming Guan (2021) Design and Performance Analysis of Brake Drum Using Finite Element Analysis. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Siet, Joseph Jiun Wen (2023) Defects Localizations and Classification on Printed Circuit Board with Image Processing and Machine Learning. Final Year Project (Bachelor), Tunku Abdul Rahman University of Management and Technology.

Sim, Chun Lam (2024) 5 Speed Gearbox Mechanism. Final Year Project (Diploma), Tunku Abdul Rahman University of Management and Technology.

Sim, Kiang Sia (2018) A study on student’s comfort level in the lecture theatre in TARUC. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Sin, Wye Yuen (2020) Autonomous Mobile Robot. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Sin, Xiu Men (2011) Design and Fabrication of Automated De - Soldering Machine. Final Year Project (Other), Tunku Abdul Rahman University College.

Siow, Kian Weng (2013) Fabrication of a Water Treatment Apparatus. Final Year Project (Other), Tunku Abdul Rahman University College.

Soh, Chin Ann (2022) Robotic Arm with Linear Controller to Screw Beverage Cap. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Song, Kah Soon (2020) Evaluation of Cutting-Edge Radius of a Cutting Tool for Milling of Die Aluminium Casting Material to Achieve Optimal Tool Wear. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Soo, Yi Kang (2020) Noise Reduction of Muffler by Optimum Design. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Soon, Jeremiah Li (2023) Vibro-Acoustical Analysis of Chakra Bowls. Final Year Project (Bachelor), Tunku Abdul Rahman University of Management and Technology.

Soon, Yick Seong (2013) Design & Manufacture a Plastic Injection Product. Final Year Project (Other), Tunku Abdul Rahman University College.

Sze, Cher Yee (2016) Design and Fabrication of Label Dispenser System For Automated Labelling Machine. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Sze, Zhuang-Jing (2011) Finite Element Analysis : the Effects of Clearance on Single and Multi Bolted Joint. Final Year Project (Other), Tunku Abdul Rahman University College.

T

Tai, Wen Dong (2019) Optimization of Waist Angle for Waist-ed Tube Type Radiators. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Tam, Pik Yan (2011) Design and Fabrication of Automated De-Soldering Machine (Mechanical Design). Final Year Project (Other), Tunku Abdul Rahman University College.

Tan, Albert Chee Siong (2011) Design and Fabrication of an Automated Marker Pen Refill Machine (Design and Programming). Final Year Project (Other), Tunku Abdul Rahman University College.

Tan, Chee Hian (2018) Computational Fluid Dynamics (CFD) Analysis on Suction Pipe. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Tan, Chee Sheng (2024) Computer Vision Tracking of Crow Flight. Final Year Project (Bachelor), Tunku Abdul Rahman University of Management and Technology.

Tan, Chee Siang (2016) Bending System for Twisted-Wire Brush. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Tan, Chee Wang (2021) Vehicle forward Collision Warning and Speed Estimation System Using Dashboard Camera. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Tan, Chi Hoe (2012) Stress Analysis Of The Output Shaft Of Portal Axle Unit Using 2D and 3D Finite Element Modelling And Simulation. Final Year Project (Other), Tunku Abdul Rahman University College.

Tan, Chia Hui (2011) Design and Fabricate Machine for Recycle Aluminium Cans. Final Year Project (Other), Tunku Abdul Rahman University College.

Tan, Ching Kok (2012) Design And Fabrication Of Automated Feeding Machine. Final Year Project (Other), Tunku Abdul Rahman University College.

Tan, Danny Jia Ming (2012) Design Automated Bubble Tea Machine. Final Year Project (Other), Tunku Abdul Rahman University College.

Tan, Dexter Zhen Liang (2021) Stabilization of the Pontoon System for a Heavy Lift Vessel. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Tan, Han Yuan (2022) Design of a Wearable Walking Aid with Torsion Spring. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Tan, Jia Cong (2021) Design of Smooth Sliding Mode Controller for Chattering Suppression in Single Axis Positioning System. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Tan, Jia Yi (2019) Evaluation of Cutting-Edge Radius (CER) for Surface and Vibration Performance in Milling DAC Material. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Tan, Jin Hong (2023) Balancing Control of Dual-Rotor Unmanned Aerial Vehicle Using Linear Controller. Final Year Project (Bachelor), Tunku Abdul Rahman University of Management and Technology.

Tan, Jing Wai (2020) Generalisation of Lattice Structure Application in Compression. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Tan, Jun Hong (2022) Design of Adaptive Azimuth Altitude Dual Axis Solar Tracking System with PID Controller. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Tan, Jun Khang (2023) A Study on Effect of Spindle Speed on Surface Roughness for Ball Nose End Mill on STAVAX Material. Final Year Project (Bachelor), Tunku Abdul Rahman University of Management and Technology.

Tan, Kah Boon (2017) Door Lock with Smart Recognition System. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Tan, Kai Lin (2011) Three-Dimensional Analyses by Finite Element Method of a Spur Gear and Helical Gear: Effect of Cracks in the Teeth Foot on the Mesh Stiffness. Final Year Project (Other), Tunku Abdul Rahman University College.

Tan, Kar Hoe (2024) Linear-Quadratic Regulator (LQR) Controller Optimisation for Disturbance Compensation Milling Table. Final Year Project (Bachelor), Tunku Abdul Rahman University of Management and Technology.

Tan, Kar Keong (2016) To Design and Fabricate a Mechanized Palm Oil Fruit Bunches Loading Truck - a Prototype. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Tan, Kenneth Chen Ning (2022) Design and Fabrication of Auto Removal Part for 3D Printer. Final Year Project (Other), Tunku Abdul Rahman University College.

Tan, Kha Kian (2018) Gait Training Equipment with Partial Weight Bearing Systems and Auto-Braking Systems. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Tan, Kheng Soon (2023) Developing a Conceptual Framework for the Application of the Unmanned Aerial Vehicle (UAV) in Malaysia's Infrastructure Projects : the Perspectives of Contractors. Masters thesis, Tunku Abdul Rahman University of Management and Technology.

Tan, Kian Hwa (2012) Design And Fabrication Of Lift Up Table. Final Year Project (Other), Tunku Abdul Rahman University College.

Tan, Kim Teck (2011) Case Study on the Implementation and Benefit of ISO 14000 in Automotive Industry. Final Year Project (Other), Tunku Abdul Rahman University College.

Tan, Koh Wei (2011) Book Scanner (Automatic Page Turner). Final Year Project (Other), Tunku Abdul Rahman University College.

Tan, Peng Sheng (2020) Finite Element Analysis of Mandible Fracture Treatment Fixation Plates (Open Reduction Fixation). Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Tan, Ren Yi (2018) Pressure Vessel Analysis of CNG Tank Using Finite Element Analysis. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Tan, Rui Kai (2019) Computation of Reduction of Viscous Hydroplaning for a Low Speed Landing Cases on Snowy Runway. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Tan, Ser Lee (2024) Effect of Doping Calcium Oxide Extracted from Clamshell on Hydroxyapatite Derived from Chicken Bone Food Waste. Final Year Project (Bachelor), Tunku Abdul Rahman University of Management and Technology.

Tan, Shang Deen (2018) Comparative Study on Obstacle Detection and Avoidance System by using Real-Time Image Processing and Artificial Intelligence in Autonomous Wheelchair Application. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Tan, Shi Wen (2020) Design and Fabrication of Sheet Metal Rolling Machine. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Tan, Sin Yun (2012) Design And Fabrication Of Pneumatic And Electro-Pneumatic Training Kit (Feeding, Stamping and Conveyor Stations). Final Year Project (Other), Tunku Abdul Rahman University College.

Tan, Siun Cheng (2012) Design of Baked Cake Machine For Food Industry. Final Year Project (Other), Tunku Abdul Rahman University College.

Tan, Thin Xuan (2022) A Study of Implementing Integrated Manufacturing System and Project Management System in a Manufacturing Industry. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Tan, Wei Ern (2022) Scissor Lift Mechanism for Remote Control Vehicle. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Tan, Wei Jau (2013) Fabrication of Motorized Stairs Climber Handtruck. Final Year Project (Other), Tunku Abdul Rahman University College.

Tan, Wei Keong (2013) Vibration Analysis of the Housing of the Gearbox. Final Year Project (Other), Tunku Abdul Rahman University College.

Tan, Wei Ming (2011) A Study on Fatigue Life Improvement in Parabolic Leaf Spring. Final Year Project (Other), Tunku Abdul Rahman University College.

Tan, Wei Ning (2019) SMT Machine Log File PDE Features Extraction and Analysis. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Tan, Wen Jian (2022) Bio-inspired Mechanical Design and Optimization of Lumbar Disc Prosthesis. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Tan, Wooi Chong (2011) Speed Control Evaporative Cooling System by Different Temperature with MPLAB. Final Year Project (Other), Tunku Abdul Rahman University College.

Tan, Wooi Ho (2011) Thixo-Forging and Simulation of Complex Parts of Aluminium Alloy. Final Year Project (Other), Tunku Abdul Rahman University College.

Tan, Yan Kai (2022) Investigation of Thermal Distribution of a Typical Data Center under Chiller Failure. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Tan, Yann Shaw (2021) Thermal Analysis of 4-Stroke Engine. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Tan, Yew Lit (2012) Stress Analysis Of the Gear Differential Using Finite Element Analysis (FEA) And Simulation Analyze. Final Year Project (Other), Tunku Abdul Rahman University College.

Tan, Yi Ming (2018) Manoeuvring of AGV Using Vision System and PID Controlled DC Motor. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Tan, Yii hang (2017) Fabrication of 3D Food Printer. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Tan, Yong Li (2013) Design of Lower Extremities Exoskeleton. Final Year Project (Other), Tunku Abdul Rahman University College.

Tan, Yoong Hoong (2013) Design, Animate and Simulate a Stair-Climbing Hand Truck. Final Year Project (Other), Tunku Abdul Rahman University College.

Tan, Yuan Kai (2016) Motorized Coin Separator. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Tan, Ze Hong (2022) Comparison Study for Crop Growth Prediction Machine Learning Model for Vertical Farms. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Tan, Zhen Jie (2021) Design and Fabrication of a Body-Physio Equipment with Data Analysis System. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Tan, Zhi Zin (2017) Vehicle Shape Matching & Recognition for ADAS Using Tchebichef Moment. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Tan, Zi Hao (2013) To Study the Effects of Several Type of Lubrications on Drill. Final Year Project (Other), Tunku Abdul Rahman University College.

Tang, Jun Ren (2019) Development of Airborne Ultrasonic Haptic Feedback System. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Tang, Sze Wei (2022) Investigation of the Thermal Distribution of a Typical Data Centre Due to Computer Room Air Conditioning (CRAC) Failure. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Tang, Xiang Hui (2018) ANSYS CFD and Heat Transfer Analysis on Heat Flow of Solar Updraft Tower Power Plant. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Tang, Yean Kel (2011) To Construct a Generator to Produce Electricity Using Wave Energy Created by a Wave Generator. Final Year Project (Other), Tunku Abdul Rahman University College.

Tang, Zhi Sheng (2020) Energy Harvesting Wireless Mouse for Self-Operational Energy Supply. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Tay, Andrew Jun Feng (2018) Autonomous Weeding Robot for Home Garden. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Tay, Chai Whye (2011) Temperature Field Estimation and Stress Estimation for the Piston of Diesel Engines. Final Year Project (Other), Tunku Abdul Rahman University College.

Tay, Kay Vooi (2022) Design of Web Unwinding Winding System Integrating Spraying System for Nano-Coating on Filters. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Tay, Ming Zun (2023) Car License Plate Recognition for Kindergarten Security Application. Final Year Project (Bachelor), Tunku Abdul Rahman University of Management and Technology.

Tay, Thye Keng (2011) Modelling and Simulation of a Parallel Plate Heat Sink Using Computational Fluid Dynamics. Final Year Project (Other), Tunku Abdul Rahman University College.

Tee, Deng Yeong (2020) Fault Diagnosis of Electric Motors Using Vibration Condition Monitoring Technique. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Tee, Swee Biao (2019) Design and Analysis on Wind Turbine Structure Subjected to Wind Loading. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Tee, Zhen Wei (2019) Numerical Analysis on Vibro-Acoustic Characterization of Honeycomb Structure with Flow Permeability. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Tee, Zhong Zhe (2023) Mechanical Pencil with Drop Protection. Final Year Project (Other), Tunku Abdul Rahman University College.

Tee, Zi Choong (2024) Disease Detection on Oil Palm Tree UAV Image Using Machine Learning. Final Year Project (Bachelor), Tunku Abdul Rahman University of Management and Technology.

Teh, Chie Chiat (2013) Design & Fabrication of Intelligent Automated Bar. Final Year Project (Other), Tunku Abdul Rahman University College.

Teh, Pet Yong (2020) Design of Water Desalination and Supply System for Orang Asli at Kemensah Hulu. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Teh, Tiong Kiat (2018) Active Yaw Control System for All-Wheel-Drive Passenger Car. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Teh, Tiong Wei (2022) Vertical and Horizontal Integration of Manufacturing Line in the Context of RAMI Industry 4.0. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Teng, Khai Sheng (2021) CFD Analysis of Impact of Rough Surface on High-Speed Rail. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Teng, Khang Nyean (2019) Simulation of Bolted Joint Applied on Aircraft Structure using ANSYS in 3-Dimensional. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Teng, Wei Kit (2024) Real-Time Monitoring and Detection of Defective Pins. Final Year Project (Bachelor), Tunku Abdul Rahman University of Management and Technology.

Teo, Chee Hao (2018) Suppression of Electric Hammer Drill Vibration. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Teo, Chun Leng (2011) Finite Element Stress Analysis on Natural Gas Motorcycle Intake Manifold. Final Year Project (Other), Tunku Abdul Rahman University College.

Teo, Jonathan Kok Chiang (2012) Design and Fabrication of a Non-Electrical Driven Positive Displacement Pump. Final Year Project (Other), Tunku Abdul Rahman University College.

Teo, Shi Hao (2018) Analysis on Rate of Heat Dissipation and Durability for Different Drilled Disc Brake. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Teo, Ying Min (2016) Design and Installation of a Rolling Mechanism for Broomstick Labelling Machine. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Teoh, Min Wei (2021) Synthesis and Characterisation of Hydroxyapatite from Bio-wastes for Biomedical Applications. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Teoh, Wai Kit (2011) Design and Fabricate the Vortex Generator (Vortex Apparatus). Final Year Project (Other), Tunku Abdul Rahman University College.

Teoh, Yong Zhong (2020) Evaluation of Cutting-Edge Radius of a Cutting Tool for Milling of P20 Material to Achieve Optimal Surface Roughness. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Ter, Leong Yang (2020) Development of Digital Twin for Rotary-Based System Using Simscape Multibody System. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Teu, Bradley Ading Tong (2016) Cap Pressing System For Twisted – Wire Brush Machine. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Tey, Kee Cheng (2022) Optimization of Material Usage of a Can Opener for Beverage Can. Final Year Project (Other), Tunku Abdul Rahman University College.

Thai, Rosemond Xin Ping (2023) Dual Axis Solar Tracker with Tinted Film. Final Year Project (Other), Tunku Abdul Rahman University College.

Thong, Ken-Neth (2018) Simulation and Analysis of Different Types of Intercoolers Applied Om Automobile and the Cooling Methods Effect on the Heat Transfer Efficiency. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Ti, Teng Jun (2018) ANSYS CFD Analysis of Heat Insulation in Cooking. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Tie, Daniel Tong Hong (2021) Design and Analysis of Weather-Dependent Dynamic Dual-Axis Stepper Motor Solar Tracker. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Tiew, Xing Let (2023) Development of Inerter Enhanced Tuned Mass Damper in Grass Trimmer. Final Year Project (Bachelor), Tunku Abdul Rahman University of Management and Technology.

Tin, Kok Poh (2018) Design of an Automated Powder Spray System for Cable Trunk. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Ting, Diew Sheng (2016) Loose Fruit Collector For Palm Oil Industry (Design & Material Selection). Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Ting, Jack Wee (2016) Motorized Coin Separator. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Ting, Jun Hao (2021) Study of the Water Cooling System for Photovoltaic (PV) Panel. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Ting, Marcus Yew Wei (2020) A Study on Optimizing Cutting Speed and Cutting Width to Improve Tool Performance in Milling SUS316 Material. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Ting, Ping Lin (2018) Grit and Sand Separation Machine and Optimization of Output. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Ting, Terence Sy Horng (2023) Optimization of Nonlinear Controller for Cutting Force Compensation in Machine Tool. Final Year Project (Bachelor), Tunku Abdul Rahman University of Management and Technology.

Tio, Jian Seng (2021) Analysis of the Cooling Efficiency of a New Conceptual Design of a Counterflow Cooling Tower. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Tiong, Oon Tien (2011) Bookscanner (Optical Character Recognition). Final Year Project (Other), Tunku Abdul Rahman University College.

Toh, Heng Kit (2023) A Study on Effect of Depth of Cut on Surface Roughness for Ball Nose End Milling on STAVAX Material. Final Year Project (Bachelor), Tunku Abdul Rahman University of Management and Technology.

Tok, Wei Moon (2023) Effects of Purities of Water and Intensity of Sunlight on the Performance of Single Slope Solar Still. Final Year Project (Bachelor), Tunku Abdul Rahman University of Management and Technology.

Tong, Weng Hong (2023) A Study on Evaluating the Effect of Depth of Cut on Tool Wear for Ball Nose End Milling in STAVAX Material. Final Year Project (Bachelor), Tunku Abdul Rahman University of Management and Technology.

Tong, Weng Sun (2019) Numerical Analysis on Chattering Suppression Ability of Smoothening Function in SMC. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Too, Teck Hua (2018) Comparison of Energy Balance, Flow Direction and Total Output of the Sinlge Stage Evaporator Against Multi-Stage Evaporator. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Too, Wee Terng (2011) Failure Finite Element Analysis of Location Axle in Tracked Tractor. Final Year Project (Other), Tunku Abdul Rahman University College.

Toong, Tee Toy (2011) Preliminary Design of a Remotely Piloted Low Speed High Wing Aircraft. Final Year Project (Other), Tunku Abdul Rahman University College.

Tunku Abdul Rahman University College, Centre for Pre-University Studies (2018) FPMS1053 Mechanics (Academic Year 2017/2018, April Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Centre for Pre-University Studies (2017) FPMS1053 Mechanics (Academic Year 2017/2018, December Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Centre for Pre-University Studies (2019) FPMS1053 Mechanics (Academic Year 2018/2019, April Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Centre for Pre-University Studies (2018) FPMS1053 Mechanics (Academic Year 2018/2019, December Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Centre for Pre-University Studies (2020) FPMS1053 Mechanics (Academic Year 2019/2020, April E-Assessment). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Centre for Pre-University Studies (2019) FPMS1053 Mechanics (Academic Year 2019/2020, August Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Centre for Pre-University Studies (2019) FPMS1053 Mechanics (Academic Year 2019/2020, December Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Centre for Pre-University Studies (2021) FPMS1053 Mechanics (Academic Year 2020/2021, April Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Centre for Pre-University Studies (2020) FPMS1053 Mechanics (Academic Year 2020/2021, August Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Centre for Pre-University Studies (2021) FPMS1053 Mechanics (Academic Year 2021/2022, December Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Centre for Pre-University Studies (2021) FPMS1053 Mechanics (Academic Year 2021/2022, September Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Centre for Pre-University Studies (2019) FPPH1064 Mechanics (Academic Year 2018/2019, April Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Centre for Pre-University Studies (2018) FPPH1064 Mechanics (Academic Year 2018/2019, August Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Centre for Pre-University Studies (2018) FPPH1064 Mechanics (Academic Year 2018/2019, December Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Centre for Pre-University Studies (2020) FPPH1064 Mechanics (Academic Year 2019/2020, April E-Assessment). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Centre for Pre-University Studies (2019) FPPH1064 Mechanics (Academic Year 2019/2020, August Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Centre for Pre-University Studies (2019) FPPH1064 Mechanics (Academic Year 2019/2020, December Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Centre for Pre-University Studies (2021) FPPH1064 Mechanics (Academic Year 2020/2021, April Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Centre for Pre-University Studies (2020) FPPH1064 Mechanics (Academic Year 2020/2021, August/September Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Centre for Pre-University Studies (2020) FPPH1064 Mechanics (Academic Year 2020/2021, December Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Centre for Pre-University Studies (2021) FPPH1064 Mechanics (Academic Year 2021/2022, December Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Centre for Pre-University Studies (2022) FPPH1064 Mechanics (Academic Year 2021/2022, May Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Centre for Pre-University Studies (2021) FPPH1064 Mechanics (Academic Year 2021/2022, September Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Centre for Pre-University Studies (2022) FPPH1064 Mechanics (Academic Year 2022/2023, September Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Applied Sciences and Computing (2014) AAMP3073 Programmable Controllers (Academic Year 2013/2014, January Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Applied Sciences and Computing (2014) AAMP3073 Programmable Controllers (Academic Year 2013/2014, March/April Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Built Environment (2018) BTBE1053 Mechanical and Electrical Services (Academic Year 2017/2018, April/May Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Built Environment (2017) BTBE1053 Mechanical and Electrical Services (Academic Year 2017/2018, September Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Built Environment (2019) BTBE1053 Mechanical and Electrical Services (Academic Year 2018/2019, April/May Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Built Environment (2019) BTBE1053 Mechanical and Electrical Services (Academic Year 2018/2019, January/February Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Built Environment (2018) BTBE1053 Mechanical and Electrical Services (Academic Year 2018/2019, September Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Built Environment (2020) BTBE1053 Mechanical and Electrical Services (Academic Year 2019/2020, April/May Final E-Assessment). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Built Environment (2020) BTBE1053 Mechanical and Electrical Services (Academic Year 2019/2020, January/February Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Built Environment (2019) BTBE1053 Mechanical and Electrical Services (Academic Year 2019/2020, September Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Built Environment (2019) BTBE1053 Mechanical and Electrical Services (Academic Year 2019/2020, September Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Built Environment (2021) BTBE1053 Mechanical and Electrical Services (Academic Year 2020/2021, April/May Final E-Assessment). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Built Environment (2020) BTBE1053 Mechanical and Electrical Services (Academic Year 2020/2021, September/October Final E-Assessment). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Built Environment (2022) BTBE1053 Mechanical and Electrical Services (Academic Year 2021/2022, April/May Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Built Environment (2017) BTBE2013 Mechanical and Electrical Services (Academic Year 2017/2018, September Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Built Environment (2018) BTBE2013 Mechanical and Electrical Services (Academic Year 2018/2019, September Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Built Environment (2018) BTEM1103 Mechanical and Electrical Services (Academic Year 2018/2019, September Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Built Environment (2019) BTEM1103 Mechanical and Electrical Services (Academic Year 2019/2020, September Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Built Environment (2020) BTEM1103 Mechanical and Electrical Services (Academic Year 2020/2021, September/October Final E-Assessment). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Built Environment (2021) BTEM1103 Mechanical and Electrical Services (Academic Year 2021/2022, October Final E-Assessment). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Built Environment (2022) BTEM1103 Mechanical and Electrical Services (Academic Year 2022/2023, October Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering (2018) ATEL2373 Engineering Mechanics (Academic Year 2017/2018, April/May Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering (2018) ATEL2373 Engineering Mechanics (Academic Year 2017/2018, January/February Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering (2018) ATGE1083 Mechanics (Academic Year 2017/2018, April/May Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering (2018) ATGE1083 Mechanics (Academic Year 2017/2018, January/February Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering (2017) ATGE1083 Mechanics (Academic Year 2017/2018, September Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering (2018) ATME1613 Theory of Machines (Academic Year 2017/2018, April/May Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering (2018) ATME1613 Theory of Machines (Academic Year 2017/2018, January/February Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering (2017) ATME1613 Theory of Machines (Academic Year 2017/2018, September Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering (2018) ATME3253 CNC and CAD/CAM Technology (Academic Year 2017/2018, April/May Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering (2018) ATME3253 CNC and CAD/CAM Technology (Academic Year 2017/2018, January/February Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering (2017) ATME3253 CNC and CAD/CAM Technology (Academic Year 2017/2018, September Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering (2018) ATME3633 Mechanical and Structural Engineering (Academic Year 2017/2018, April/May Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering (2017) ATME3633 Mechanical and Structural Engineering (Academic Year 2017/2018, September Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering (2018) ATMH1283 CNC and Workshop Technology (Academic Year 2017/2018, April/May Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering (2018) ATMH1283 CNC and Workshop Technology (Academic Year 2017/2018, January/February Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering (2018) ATMH2043 Basic Mechatronics (Academic Year 2017/2018, April/May Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering (2018) ATMH2043 Basic Mechatronics (Academic Year 2017/2018, January/February Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering (2017) ATMH2043 Basic Mechatronics (Academic Year 2017/2018, September Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering (2018) ATMH2683 Applied Mechanics (Academic Year 2017/2018, January/February Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering (2017) ATMH2683 Applied Mechanics (Academic Year 2017/2018, September Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering (2018) ATMH3043 Applied Mechatronics (Academic Year 2017/2018, April/May Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering (2018) ATMH3043 Applied Mechatronics (Academic Year 2017/2018, January/February Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering (2017) ATMH3043 Applied Mechatronics (Academic Year 2017/2018, September Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering (2018) ATMH3083 Applied Mechatronics (Academic Year 2017/2018, April/May Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering (2018) ATMH3083 Applied Mechatronics (Academic Year 2017/2018, September Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering (2018) ATMH3633 Mechanical and Structural Engineering (Academic Year 2017/2018, April/May Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering (2018) BGMC2123 Theory of Machines (Academic Year 2017/2018, April/May Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering (2018) BGMC2123 Theory of Machines (Academic Year 2017/2018, January/February Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering (2017) BGMC2123 Theory of Machines (Academic Year 2017/2018, September Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering (2018) BGMC2513 Electrical Machines (Academic Year 2017/2018, April/May Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering (2018) BGMC2513 Electrical Machines (Academic Year 2017/2018, January/February Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering (2018) BGME3353 Mechanical Instrumentation and Measurement (Academic Year 2017/2018, January/February Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering (2018) BTEE2513 Electrical Machines (Academic Year 2017/2018, January/February Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering (2017) BTEE2513 Electrical Machines (Academic Year 2017/2018, September Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering (2017) BTMC1113 Engineering Mechanics (Academic Year 2017/2018, September Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering (2018) BTMC3513 Electrical Machines (Academic Year 2017/2018, April/May Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering (2018) BTMC3513 Electrical Machines (Academic Year 2017/2018, January/February Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering (2017) BTMC3513 Electrical Machines (Academic Year 2017/2018, September Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering (2017) BTMC3643 Product Design and Development (Academic Year 2017/2018, September Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering (2017) BTMC4643 Product Design and Development (Academic Year 2017/2018, September Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering (2018) BTME1323 CNC Technology (Academic Year 2017/2018, January/February Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering (2018) BTME2163 Mechanics of Solids (Academic Year 2017/2018, April/May Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering (2017) BTME2163 Mechanics of Solids (Academic Year 2017/2018, September Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering (2018) BTME2213 Fluid Mechanics (Academic Year 2017/2018, April/May Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering (2018) BTME2213 Fluid Mechanics (Academic Year 2017/2018, January/February Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering (2017) BTME2213 Fluid Mechanics (Academic Year 2017/2018, September Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering (2018) BTME2223 Applied Fluid Mechanics (Academic Year 2017/2018, April/May Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering (2018) BTME2223 Applied Fluid Mechanics (Academic Year 2017/2018, January/February Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering (2017) BTME2223 Applied Fluid Mechanics (Academic Year 2018/2019, September Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering (2018) BTME3123 Dynamics of Mechanical Systems (Academic Year 2017/2018, April/May Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering (2018) BTME3123 Dynamics of Mechanical Systems (Academic Year 2017/2018, January/February Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering (2017) BTME3123 Dynamics of Mechanical Systems (Academic Year 2017/2018, September Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering (2018) BTME4353 Mechanical Instrumentation and Measurement (Academic Year 2017/2018, April/May Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering (2018) BTME4353 Mechanical Instrumentation and Measurement (Academic Year 2017/2018, January/February Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering (2017) BTME4353 Mechanical Instrumentation and Measurement (Academic Year 2017/2018, September Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering (2018) BTMH1483 Fundamental of Robotics, CNC and Manufacturing (Academic Year 2017/2018, January/February Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering (2018) BTMH2123 Theory of Machines (Academic Year 2017/2018, January/February Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering (2017) BTMH2123 Theory of Machines (Academic Year 2017/2018, September Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2020) AGMC1263 Mechanics: Statics (Academic Year 2019/2020, April/May Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2020) AGMC1263 Mechanics: Statics (Academic Year 2019/2020, January/February Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2021) AGMC1263 Mechanics: Statics (Academic Year 2020/2021, April/May Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2020) AGMC1263 Mechanics: Statics (Academic Year 2020/2021, December Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2022) AGMC1263 Mechanics: Statics (Academic Year 2021/2022, April/May Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2021) AGMC1263 Mechanics: Statics (Academic Year 2021/2022, December Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2021) AGMC1263 Mechanics: Statics (Academic Year 2021/2022, October Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2022) AGMC1263 Mechanics: Statics (Academic Year 2022/2023, October Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2020) AGMC2154 CNC Technology (Academic Year 2020/2021, December Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2020) AGMC2154 CNC Technology (Academic Year 2020/2021, September/October Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2022) AGMC2154 CNC Technology (Academic Year 2021/2022, April/May Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2021) AGMC2154 CNC Technology (Academic Year 2021/2022, December Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2021) AGMC2154 CNC Technology (Academic Year 2021/2022, October Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2022) AGMC2154 CNC Technology (Academic Year 2022/2023, October Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2021) AGMC2263 Mechanics: Dynamics (Academic Year 2020/2021, April/May Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2022) AGMC2263 Mechanics: Dynamics (Academic Year 2021/2022, April/May Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2022) AGMC2263 Mechanics: Dynamics (Academic Year 2022/2023, October Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2022) AGME2213 Fluid Mechanics (Academic Year 2021/2022, April/May Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2022) AGME2213 Fluid Mechanics (Academic Year 2022/2023, October Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2021) AGME2373 Mechanics of Machines (Academic Year 2020/2021, April/May Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2022) AGME2373 Mechanics of Machines (Academic Year 2021/2022, April/May Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2022) AGME2373 Mechanics of Machines (Academic Year 2022/2023, October Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2018) ATEL2373 Engineering Mechanics (Academic Year 2018/2019, September Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2020) ATEL2373 Engineering Mechanics (Academic Year 2019/2019, April/May Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2019) ATEL2373 Engineering Mechanics (Academic Year 2019/2020, September Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2019) ATGE1083 Mechanics (Academic Year 2018/2019, April/May Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2018) ATGE1083 Mechanics (Academic Year 2018/2019, September Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2020) ATGE1083 Mechanics (Academic Year 2019/2020, April/May Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2019) ATGE1083 Mechanics (Academic Year 2019/2020, September Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2021) ATGE1083 Mechanics (Academic Year 2020/2021, April/May Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2020) ATGE1083 Mechanics (Academic Year 2020/2021, December Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2020) ATGE1083 Mechanics (Academic Year 2020/2021, September/October Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2022) ATGE1083 Mechanics (Academic Year 2021/2022, April/May Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2021) ATGE1083 Mechanics (Academic Year 2021/2022, December Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2021) ATGE1083 Mechanics (Academic Year 2021/2022, October Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2023) ATGE1083 Mechanics (Academic Year 2022/2023, January Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2022) ATGE1083 Mechanics (Academic Year 2022/2023, October Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2019) ATME1613 Theory of Machines (Academic Year 2018/2019, April/May Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2019) ATME1613 Theory of Machines (Academic Year 2018/2019, January/February Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2018) ATME1613 Theory of Machines (Academic Year 2018/2019, September Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2020) ATME1613 Theory of Machines (Academic Year 2020/2021, December Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2019) ATME3253 CNC and CAD/CAM Technology (Academic Year 2018/2019, April/May Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2019) ATME3253 CNC and CAD/CAM Technology (Academic Year 2018/2019, January/February Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2018) ATME3253 CNC and CAD/CAM Technology (Academic Year 2018/2019, September Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2020) ATME3253 CNC and CAD/CAM Technology (Academic Year 2019/2020, April Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2019) ATME3253 CNC and CAD/CAM Technology (Academic Year 2019/2020, September Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2021) ATME3253 CNC and CAD/CAM Technology (Academic Year 2020/2021, April/May Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2020) ATME3253 CNC and CAD/CAM Technology (Academic Year 2020/2021, September Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2019) ATME3633 Mechanical and Structural Engineering (Academic Year 2018/2019, April/May Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2018) ATME3633 Mechanical and Structural Engineering (Academic Year 2018/2019, September Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2020) ATME3633 Mechanical and Structural Engineering (Academic Year 2019/2020, January/February Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2019) ATME3633 Mechanical and Structural Engineering (Academic Year 2019/2020, September Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2020) ATME3633/ ATMH3633 Mechanical and Structural Engineering (Academic Year 2019/2020, April/May Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2020) ATME3633/ ATMH3633 Mechanical and Structural Engineering (Academic Year 2020/2021, December Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2020) ATME3633/ ATMH3633 Mechanical and Structural Engineering (Academic Year 2020/2021, September/October Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2019) ATMH1283 CNC and Workshop Technology (Academic Year 2018/2019, April/May Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2019) ATMH1283 CNC and Workshop Technology (Academic Year 2018/2019, January/February Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2018) ATMH1283 CNC and Workshop Technology (Academic Year 2018/2019, September Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2020) ATMH1283 CNC and Workshop Technology (Academic Year 2019/2020, April/May Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2020) ATMH1283 CNC and Workshop Technology (Academic Year 2019/2020, January/February Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2020) ATMH1283 CNC and Workshop Technology (Academic Year 2020/2021, December Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2019) ATMH2043 Basic Mechatronics (Academic Year 2018/2019, April/May Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2020) ATMH2043 Basic Mechatronics (Academic Year 2019/2020, April Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2019) ATMH2043 Basic Mechatronics (Academic Year 2019/2020, September Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2019) ATMH2683 Applied Mechanics (Academic Year 2018/2019, April/May Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2018) ATMH2683 Applied Mechanics (Academic Year 2018/2019, September Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2019) ATMH2683 Applied Mechanics (Academic Year 2019/2020, September Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2019) ATMH3083 Applied Mechatronics (Academic Year 2018/2019, April/May Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2019) ATMH3083 Applied Mechatronics (Academic Year 2018/2019, January/February Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2018) ATMH3083 Applied Mechatronics (Academic Year 2018/2019, September Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2020) ATMH3083 Applied Mechatronics (Academic Year 2019/2020, April Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2019) ATMH3083 Applied Mechatronics (Academic Year 2019/2020, September Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2021) ATMH3083 Applied Mechatronics (Academic Year 2020/2021, April/May Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2019) ATMH3633 Mechanical and Structural Engineering (Academic Year 2018/2019, April/May Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2018) ATMH3633 Mechanical and Structural Engineering (Academic Year 2018/2019, September Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2020) ATMH3633 Mechanical and Structural Engineering (Academic Year 2019/2020, January/February Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2019) ATMH3633 Mechanical and Structural Engineering (Academic Year 2019/2020, September Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2019) ATMT3234 Mechanical and Structural Engineering (Academic Year 2018/2019, April/May Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2019) ATMT3234 Mechanical and Structural Engineering (Academic Year 2018/2019, January/February Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2018) BGEE3513 Electrical Machines (Academic Year 2018/2019, September Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2020) BGEE3513 Electrical Machines (Academic Year 2019/2020, January/February Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2019) BGEE3513 Electrical Machines (Academic Year 2019/2020, September Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2021) BGEE3513 Electrical Machines (Academic Year 2020/2021, April/May Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2020) BGEE3513 Electrical Machines (Academic Year 2020/2021, December Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2022) BGEE3513 Electrical Machines (Academic Year 2021/2022, April/May Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2021) BGEE3513 Electrical Machines (Academic Year 2021/2022, October Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2022) BGEE3513 Electrical Machines (Academic Year 2022/2023, October Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2020) BGMC1513 CNC and Workshop Technology (Academic Year 2019/2020, April/May Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2020) BGMC1513 CNC and Workshop Technology (Academic Year 2019/2020, January/February Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2022) BGMC1513 CNC and Workshop Technology (Academic Year 2021/2022, April/May Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2021) BGMC1513 CNC and Workshop Technology (Academic Year 2021/2022, December Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2021) BGMC1513 CNC and Workshop Technology (Academic Year 2021/2022, October/November Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2022) BGMC1513 CNC and Workshop Technology (Academic Year 2022/2023, October Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2019) BGMC2123 Theory of Machines (Academic Year 2018/2019, April/May Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2019) BGMC2123 Theory of Machines (Academic Year 2018/2019, January/February Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2018) BGMC2123 Theory of Machines (Academic Year 2018/2019, September Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2020) BGMC2123 Theory of Machines (Academic Year 2019/2020, April Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2020) BGMC2123 Theory of Machines (Academic Year 2019/2020, January/February Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2019) BGMC2123 Theory of Machines (Academic Year 2019/2020, September Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2021) BGMC2123 Theory of Machines (Academic Year 2020/2021, May Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2022) BGMC2123 Theory of Machines (Academic Year 2021/2022, April/May Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2021) BGMC2123 Theory of Machines (Academic Year 2021/2022, December Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2021) BGMC2123 Theory of Machines (Academic Year 2021/2022, October Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2022) BGMC2123 Theory of Machines (Academic Year 2022/2023, October Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2019) BGMC2513 Electrical Machines (Academic Year 2018/2019, April/May Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2019) BGMC2513 Electrical Machines (Academic Year 2018/2019, January/February Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2018) BGMC2513 Electrical Machines (Academic Year 2018/2019, September Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2020) BGMC2513 Electrical Machines (Academic Year 2019/2020, April Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2020) BGMC2513 Electrical Machines (Academic Year 2019/2020, January/February Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2019) BGMC2513 Electrical Machines (Academic Year 2019/2020, September Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2021) BGMC2513 Electrical Machines (Academic Year 2020/2021, April/May Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2020) BGMC2513 Electrical Machines (Academic Year 2020/2021, September/October Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2022) BGMC2513 Electrical Machines (Academic Year 2021/2022, April/May Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2021) BGMC2513 Electrical Machines (Academic Year 2021/2022, December Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2021) BGMC2513 Electrical Machines (Academic Year 2021/2022, October Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2022) BGMC2513 Electrical Machines (Academic Year 2022/2023, October Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2019) BGME3353 Mechanical Instrumentation and Measurement (Academic Year 2018/2019, April/May Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2019) BGME3353 Mechanical Instrumentation and Measurement (Academic Year 2018/2019, January/February Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2018) BGME3353 Mechanical Instrumentation and Measurement (Academic Year 2018/2019, September Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2020) BGME3353 Mechanical Instrumentation and Measurement (Academic Year 2019/2020, April Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2019) BGME3353 Mechanical Instrumentation and Measurement (Academic Year 2019/2020, September Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2020) BGME3353 Mechanical Instrumentation and Measurement (Academic Year 2020/2021, December Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2021) BGME3353 Mechanical Instrumentation and Measurement (Academic Year 2020/2021, May Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2020) BGME3353 Mechanical Instrumentation and Measurement (Academic Year 2020/2021, October Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2022) BGME3353 Mechanical Instrumentation and Measurement (Academic Year 2021/2022, April/May Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2021) BGME3353 Mechanical Instrumentation and Measurement (Academic Year 2021/2022, October Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2022) BGME3353 Mechanical Instrumentation and Measurement (Academic Year 2022/2023, October Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2022) BGMH3743 Fluid Mechanics and Hydraulics (Academic Year 2021/2022, April/May Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2022) BGMH3743 Fluid Mechanics and Hydraulics (Academic Year 2022/2023, October Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2019) BGMT2113 Engineering Mechanics (Academic Year 2018/2019, January/February Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2020) BGMT2113 Engineering Mechanics (Academic Year 2019/2020, January/February Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2020) BGMT2113 Engineering Mechanics (Academic Year 2020/2021, December Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2019) BTMC1113 Engineering Mechanics (Academic Year 2018/2019, January/February Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2018) BTMC1113 Engineering Mechanics (Academic Year 2018/2019, September Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2019) BTMC1113 Engineering Mechanics (Academic Year 2019/2020, September Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2019) BTMC3513 Electrical Machines (Academic Year 2018/2019, January/February Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2018) BTMC3513 Electrical Machines (Academic Year 2018/2019, September Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2019) BTMC3513 Electrical Machines (Academic Year 2019/2020, September Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2019) BTME1323 CNC Technology (Academic Year 2018/2019, January/February Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2018) BTME1323 CNC Technology (Academic Year 2018/2019, September Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2019) BTME1323 CNC Technology (Academic Year 2019/2020, September Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2019) BTME2163 Mechanics of Solids (Academic Year 2018/2019, April/May Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2019) BTME2163 Mechanics of Solids (Academic Year 2018/2019, January/February Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2018) BTME2163 Mechanics of Solids (Academic Year 2018/2019, September Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2020) BTME2163 Mechanics of Solids (Academic Year 2019/2020, April Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2020) BTME2163 Mechanics of Solids (Academic Year 2019/2020, January/February Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2019) BTME2163 Mechanics of Solids (Academic Year 2019/2020, September Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2020) BTME2163 Mechanics of Solids (Academic Year 2020/2021, September/October Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2022) BTME2163 Mechanics of Solids (Academic Year 2021/2022, April/May Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2021) BTME2163 Mechanics of Solids (Academic Year 2021/2022, October Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2022) BTME2163 Mechanics of Solids (Academic Year 2022/2023, October Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2021) BTME2213 Fluid Mechanics (Academic Year 2020/2021, April/May Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2019) BTME2213 Fluid Mechanics (Academic Year 2018/2019, April/May Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2019) BTME2213 Fluid Mechanics (Academic Year 2018/2019, January/February Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2018) BTME2213 Fluid Mechanics (Academic Year 2018/2019, September Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2020) BTME2213 Fluid Mechanics (Academic Year 2019/2020, January/February Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2019) BTME2213 Fluid Mechanics (Academic Year 2019/2020, September Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2020) BTME2213 Fluid Mechanics (Academic Year 2020/2021, December Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2020) BTME2213 Fluid Mechanics (Academic Year 2020/2021, September/October Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2022) BTME2213 Fluid Mechanics (Academic Year 2021/2022, April/May Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2021) BTME2213 Fluid Mechanics (Academic Year 2021/2022, December Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2021) BTME2213 Fluid Mechanics (Academic Year 2021/2022, October Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2022) BTME2213 Fluid Mechanics (Academic Year 2022/2023, October Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2019) BTME2223 Applied Fluid Mechanics (Academic Year 2018/2019, January/February Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2019) BTME2223 Applied Fluid Mechanics (Academic Year 2018/2019, April/May Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2018) BTME2223 Applied Fluid Mechanics (Academic Year 2018/2019, September Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2019) BTME2223 Applied Fluid Mechanics (Academic Year 2018/2019, September Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2020) BTME2223 Applied Fluid Mechanics (Academic Year 2019/2020, April Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2020) BTME2223 Applied Fluid Mechanics (Academic Year 2019/2020, January/February Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2021) BTME2223 Applied Fluid Mechanics (Academic Year 2020/2021, April/May Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2020) BTME2223 Applied Fluid Mechanics (Academic Year 2020/2021, December Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2020) BTME2223 Applied Fluid Mechanics (Academic Year 2020/2021, September/October Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2022) BTME2223 Applied Fluid Mechanics (Academic Year 2021/2022, April/May Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2021) BTME2223 Applied Fluid Mechanics (Academic Year 2021/2022, December Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2021) BTME2223 Applied Fluid Mechanics (Academic Year 2021/2022, October Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2022) BTME2223 Applied Fluid Mechanics (Academic Year 2022/2023, October Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2019) BTME3123 Dynamics of Mechanical Systems (Academic Year 2018/2019, April/May Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2019) BTME3123 Dynamics of Mechanical Systems (Academic Year 2018/2019, January/February Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2018) BTME3123 Dynamics of Mechanical Systems (Academic Year 2018/2019, September Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2020) BTME3123 Dynamics of Mechanical Systems (Academic Year 2019/2020, April/May Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2020) BTME3123 Dynamics of Mechanical Systems (Academic Year 2019/2020, January/February Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2019) BTME3123 Dynamics of Mechanical Systems (Academic Year 2019/2020, September Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2021) BTME3123 Dynamics of Mechanical Systems (Academic Year 2020/2021, May Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2020) BTME3123 Dynamics of Mechanical Systems (Academic Year 2020/2021, September Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2022) BTME3123 Dynamics of Mechanical Systems (Academic Year 2021/2022, April/May Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2021) BTME3123 Dynamics of Mechanical Systems (Academic Year 2021/2022, December Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2021) BTME3123 Dynamics of Mechanical Systems (Academic Year 2021/2022, October Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2022) BTME3123 Dynamics of Mechanical Systems (Academic Year 2022/2023, October Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2019) BTME4233 Computational Fluid Dynamics (Academic Year 2018/2019, January/February Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2018) BTME4233 Computational Fluid Dynamics (Academic Year 2018/2019, September Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2020) BTME4233 Computational Fluid Dynamics (Academic Year 2019/2020, January/February Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2019) BTME4233 Computational Fluid Dynamics (Academic Year 2019/2020, September Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2018) BTME4353 Mechanical Instrumentation and Measurement (Academic Year 2018/2019, September Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2019) BTMT2044 Mechanics of Fluids (Academic Year 2018/2019, January/February Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2020) BTMT2044 Mechanics of Fluids (Academic Year 2019/2020, April/May Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University College, Faculty of Engineering and Technology (2020) BTMT2044 Mechanics of Fluids (Academic Year 2019/2020, January/February Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University of Management and Technology, Centre for Pre-University Studies (2023) FPPH1064 Mechanics (Academic Year 2022/2023, January Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University of Management and Technology, Centre for Pre-University Studies (2023) FPPH1064 Mechanics (Academic Year 2022/2023, May Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University of Management and Technology, Faculty of Applied Sciences (2024) BLAP1043 Mechanics (Academic Year 2023/2024, May/June Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University of Management and Technology, Faculty of Built Environment (2023) BTBE1053 Mechanical and Electrical Services (Academic Year 2022/2023, May/June Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University of Management and Technology, Faculty of Built Environment (2024) BTBE1053 Mechanical and Electrical Services (Academic Year 2023/2024, January Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University of Management and Technology, Faculty of Built Environment (2024) BTBE1053 Mechanical and Electrical Services (Academic Year 2023/2024, May/June Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University of Management and Technology, Faculty of Built Environment (2024) BTEM1103 Mechanical and Electrical Services (Academic Year 2023/2024, May/June Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University of Management and Technology, Faculty of Built Environment (2023) BTEM1103 Mechanical and Electrical Services (Academic Year 2023/2024, October Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University of Management and Technology, Faculty of Engineering and Technology (2024) AGDP1224 Mechanics of Machines (Academic Year 2023/2024, May/June Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University of Management and Technology, Faculty of Engineering and Technology (2023) AGMC1263 Mechanics: Statics (Academic Year 2022/2023, January Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University of Management and Technology, Faculty of Engineering and Technology (2023) AGMC1263 Mechanics: Statics (Academic Year 2022/2023, May/June Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University of Management and Technology, Faculty of Engineering and Technology (2024) AGMC1263 Mechanics: Statics (Academic Year 2023/2024, January Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University of Management and Technology, Faculty of Engineering and Technology (2024) AGMC1263 Mechanics: Statics (Academic Year 2023/2024, May/June Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University of Management and Technology, Faculty of Engineering and Technology (2023) AGMC1263 Mechanics: Statics (Academic Year 2023/2024, October Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University of Management and Technology, Faculty of Engineering and Technology (2023) AGMC2154 CNC Technology (Academic Year 2022/2023, January Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University of Management and Technology, Faculty of Engineering and Technology (2023) AGMC2154 CNC Technology (Academic Year 2022/2023, May/June Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University of Management and Technology, Faculty of Engineering and Technology (2024) AGMC2154 CNC Technology (Academic Year 2023/2024, May/June Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University of Management and Technology, Faculty of Engineering and Technology (2023) AGMC2154 CNC Technology (Academic Year 2023/2024, October Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University of Management and Technology, Faculty of Engineering and Technology (2023) AGMC2263 Mechanics: Dynamics (Academic Year 2022/2023, January Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University of Management and Technology, Faculty of Engineering and Technology (2023) AGMC2263 Mechanics: Dynamics (Academic Year 2022/2023, May/June Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University of Management and Technology, Faculty of Engineering and Technology (2024) AGMC2263 Mechanics: Dynamics (Academic Year 2023/2024, January Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University of Management and Technology, Faculty of Engineering and Technology (2024) AGMC2263 Mechanics: Dynamics (Academic Year 2023/2024, May/June Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University of Management and Technology, Faculty of Engineering and Technology (2023) AGMC2263 Mechanics: Dynamics (Academic Year 2023/2024, October Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University of Management and Technology, Faculty of Engineering and Technology (2023) AGME2213 Fluid Mechanics (Academic Year 2022/2023, January Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University of Management and Technology, Faculty of Engineering and Technology (2023) AGME2213 Fluid Mechanics (Academic Year 2022/2023, May/June Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University of Management and Technology, Faculty of Engineering and Technology (2024) AGME2213 Fluid Mechanics (Academic Year 2023/2024, January Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University of Management and Technology, Faculty of Engineering and Technology (2024) AGME2213 Fluid Mechanics (Academic Year 2023/2024, May/June Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University of Management and Technology, Faculty of Engineering and Technology (2023) AGME2213 Fluid Mechanics (Academic Year 2023/2024, October Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University of Management and Technology, Faculty of Engineering and Technology (2023) AGME2373 Mechanics of Machines (Academic Year 2022/2023, May/June Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University of Management and Technology, Faculty of Engineering and Technology (2024) AGME2373 Mechanics of Machines (Academic Year 2023/2024, May/June Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University of Management and Technology, Faculty of Engineering and Technology (2023) AGME2373 Mechanics of Machines (Academic Year 2023/2024, October Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University of Management and Technology, Faculty of Engineering and Technology (2023) AGPD1224 Mechanics of Machines (Academic Year 2022/2023, May/June Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University of Management and Technology, Faculty of Engineering and Technology (2023) ATGE1083 Mechanics (Academic Year 2022/2023, May/June Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University of Management and Technology, Faculty of Engineering and Technology (2024) ATGE1083 Mechanics (Academic Year 2023/2024, January Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University of Management and Technology, Faculty of Engineering and Technology (2024) ATGE1083 Mechanics (Academic Year 2023/2024, May/June Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University of Management and Technology, Faculty of Engineering and Technology (2023) ATGE1083 Mechanics (Academic Year 2023/2024, October Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University of Management and Technology, Faculty of Engineering and Technology (2023) BGEE3513 Electrical Machines (Academic Year 2022/2023, May/June Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University of Management and Technology, Faculty of Engineering and Technology (2024) BGEE3513 Electrical Machines (Academic Year 2023/2024, May/June Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University of Management and Technology, Faculty of Engineering and Technology (2023) BGEE3513 Electrical Machines (Academic Year 2023/2024, October Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University of Management and Technology, Faculty of Engineering and Technology (2023) BGET1033 Mechanics (Academic Year 2023/2024, October Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University of Management and Technology, Faculty of Engineering and Technology (2023) BGMC1513 CNC and Workshop Technology (Academic Year 2022/2023, January Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University of Management and Technology, Faculty of Engineering and Technology (2023) BGMC1513 CNC and Workshop Technology (Academic Year 2022/2023, May/June Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University of Management and Technology, Faculty of Engineering and Technology (2024) BGMC1513 CNC and Workshop Technology (Academic Year 2023/2024, January Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University of Management and Technology, Faculty of Engineering and Technology (2024) BGMC1513 CNC and Workshop Technology (Academic Year 2023/2024, May/June Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University of Management and Technology, Faculty of Engineering and Technology (2023) BGMC1513 CNC and Workshop Technology (Academic Year 2023/2024, October Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University of Management and Technology, Faculty of Engineering and Technology (2023) BGMC2123 Theory of Machines (Academic Year 2022/2023, January Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University of Management and Technology, Faculty of Engineering and Technology (2023) BGMC2123 Theory of Machines (Academic Year 2022/2023, May/June Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University of Management and Technology, Faculty of Engineering and Technology (2024) BGMC2123 Theory of Machines (Academic Year 2023/2024, January Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University of Management and Technology, Faculty of Engineering and Technology (2024) BGMC2123 Theory of Machines (Academic Year 2023/2024, May/June Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University of Management and Technology, Faculty of Engineering and Technology (2023) BGMC2123 Theory of Machines (Academic Year 2023/2024, October Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University of Management and Technology, Faculty of Engineering and Technology (2023) BGMC2513 Electrical Machines (Academic Year 2022/2023, January Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University of Management and Technology, Faculty of Engineering and Technology (2023) BGMC2513 Electrical Machines (Academic Year 2022/2023, May/June Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University of Management and Technology, Faculty of Engineering and Technology (2024) BGMC2513 Electrical Machines (Academic Year 2023/2024, January Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University of Management and Technology, Faculty of Engineering and Technology (2024) BGMC2513 Electrical Machines (Academic Year 2023/2024, May/June Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University of Management and Technology, Faculty of Engineering and Technology (2023) BGMC2513 Electrical Machines (Academic Year 2023/2024, October Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University of Management and Technology, Faculty of Engineering and Technology (2023) BGMC4523 Advances in Industrial Revolution 4.0 (Academic Year 2023/2024, October Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University of Management and Technology, Faculty of Engineering and Technology (2024) BGME3353 Mechanical Instrumentation & Measurement (Academic Year 2023/2024, May/June Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University of Management and Technology, Faculty of Engineering and Technology (2023) BGME3353 Mechanical Instrumentation and Measurement (Academic Year 2022/2023, May/June Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University of Management and Technology, Faculty of Engineering and Technology (2024) BGME3353 Mechanical Instrumentation and Measurement (Academic Year 2023/2024, January Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University of Management and Technology, Faculty of Engineering and Technology (2023) BGME3353 Mechanical Instrumentation and Measurement (Academic Year 2023/2024, October Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University of Management and Technology, Faculty of Engineering and Technology (2023) BGMH3743 Fluid Mechanics and Hydraulics (Academic Year 2022/2023, May/June Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University of Management and Technology, Faculty of Engineering and Technology (2024) BGMH3743 Fluid Mechanics and Hydraulics (Academic Year 2023/2024, May/June Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University of Management and Technology, Faculty of Engineering and Technology (2023) BGMH3743 Fluid Mechanics and Hydraulics (Academic Year 2023/2024, October Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University of Management and Technology, Faculty of Engineering and Technology (2023) BTME2163 Mechanics of Solids (Academic Year 2022/2023, May/June Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University of Management and Technology, Faculty of Engineering and Technology (2024) BTME2163 Mechanics of Solids (Academic Year 2023/2024, January Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University of Management and Technology, Faculty of Engineering and Technology (2024) BTME2163 Mechanics of Solids (Academic Year 2023/2024, May/June Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University of Management and Technology, Faculty of Engineering and Technology (2023) BTME2163 Mechanics of Solids (Academic Year 2023/2024, October Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University of Management and Technology, Faculty of Engineering and Technology (2023) BTME2213 Fluid Mechanics (Academic Year 2022/2023, January Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University of Management and Technology, Faculty of Engineering and Technology (2023) BTME2213 Fluid Mechanics (Academic Year 2022/2023, May/June Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University of Management and Technology, Faculty of Engineering and Technology (2024) BTME2213 Fluid Mechanics (Academic Year 2023/2024, January Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University of Management and Technology, Faculty of Engineering and Technology (2024) BTME2213 Fluid Mechanics (Academic Year 2023/2024, May/June Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University of Management and Technology, Faculty of Engineering and Technology (2023) BTME2213 Fluid Mechanics (Academic Year 2023/2024, October Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University of Management and Technology, Faculty of Engineering and Technology (2024) BTME2223 Applied Fluid Mechanics (Academic Year 2023/2024, May/June Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University of Management and Technology, Faculty of Engineering and Technology (2023) BTME2223 Applied Fluid Mechanics (Academic Year 2022/2023, January Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University of Management and Technology, Faculty of Engineering and Technology (2023) BTME2223 Applied Fluid Mechanics (Academic Year 2022/2023, May/June Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University of Management and Technology, Faculty of Engineering and Technology (2024) BTME2223 Applied Fluid Mechanics (Academic Year 2023/2024, January Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University of Management and Technology, Faculty of Engineering and Technology (2023) BTME2223 Applied Fluid Mechanics (Academic Year 2023/2024, October Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University of Management and Technology, Faculty of Engineering and Technology (2024) BTME3123 Dynamics of Mechanical Systems (Academic Year 2023/2024, May/June Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University of Management and Technology, Faculty of Engineering and Technology (2023) BTME3123 Dynamics of Mechanical Systems (Academic Year 2022/2023, January Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University of Management and Technology, Faculty of Engineering and Technology (2023) BTME3123 Dynamics of Mechanical Systems (Academic Year 2022/2023, May/June Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University of Management and Technology, Faculty of Engineering and Technology (2024) BTME3123 Dynamics of Mechanical Systems (Academic Year 2023/2024, January Examination). Past Year Question Paper (Unpublished)

Tunku Abdul Rahman University of Management and Technology, Faculty of Engineering and Technology (2023) BTME3123 Dynamics of Mechanical Systems (Academic Year 2023/2024, October Examination). Past Year Question Paper (Unpublished)

V

Vooi, Vern Han (2021) Multi Model Processing System of Automatic Wiper Arm via Artificial Intelligence Based Prediction Module. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

W

Wang, Elijah Da Jiong (2022) Design and Analysis of an Efficient Automatic Glove Packing Machine. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Wang, Pei Chee (2023) Deep Learning Approach for Classification of Retinal Diseases from Optical Coherence Tomography Images. Final Year Project (Bachelor), Tunku Abdul Rahman University of Management and Technology.

Wee, Cindy Jia Yee (2020) Optimization Analysis for Blade Propeller. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Wee, Marcos Ming Wei (2024) Classifying the Health Status of Oil Palm Trees Using Deep Neural Network. Final Year Project (Bachelor), Tunku Abdul Rahman University of Management and Technology.

Wee, Marcus Ding Yue (2024) Cleaning Tool for Individuals with Skin Allergies. Final Year Project (Diploma), Tunku Abdul Rahman University of Management and Technology.

Wei, Way Chen (2012) A Case Study on Improving the Metal Sheet Forming Process in Manufacturing Industries. Final Year Project (Other), Tunku Abdul Rahman University College.

Wong, Bao Yie (2018) Optimization of the Tensile Strength of Low Carbon Steel,Weld Joints Using MIG Welding. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Wong, Billy Kiin Tian (2017) Crash Analysis and Design of Road Traffic Dividers Using ANSYS. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Wong, Chee Siang (2020) Sugarcane Bagasse to Produce Medium Density Fiberboard for Household Application Like Furniture. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Wong, Chun Fei (2019) Indoor Positioning and Navigation for RC Car. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Wong, Chun Hou (2019) Design and Develop Low Cost Air Driven Engine. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Wong, Chung Fung (2020) Studies and Development of Automated Unloading System for Metal Roofing. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Wong, Eng Wei (2016) Design and Fabrication of Conveyer System for Labelling Machine. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Wong, Jia Shen (2019) Case Study on Cold Rolling Process Using Finite Element Analysis. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Wong, Jia Yang (2024) Optimised Nonlinear Controller for Disturbance Force Compensation in Ball-Screw Drive System. Final Year Project (Bachelor), Tunku Abdul Rahman University of Management and Technology.

Wong, Jia Ying (2023) Brain Tumour Classification Based on MRI Scans Using Deep Learning Approaches. Final Year Project (Bachelor), Tunku Abdul Rahman University of Management and Technology.

Wong, Jian Wai (2023) Machine Learning Approach for BSR Disease Classification of Palm Oil Trees Using RGB Image Analysis. Final Year Project (Bachelor), Tunku Abdul Rahman University of Management and Technology.

Wong, Joon Kit (2020) Development of Piezoelectric Energy Harvester Based on Two-Stage Force Amplification Frame. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Wong, Joon Yap (2020) Modelling of Two-wheeler for the Study of Auto Balancing System. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Wong, Jun H'ng (2023) Design and Fabrication of a Disc Cutter Using Portable Grinder. Final Year Project (Other), Tunku Abdul Rahman University College.

Wong, Kai Wen (2020) Isothermal Optimization for Anaerobic Digestion Mixture in Jacketed Vessel. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Wong, Kai Xian (2023) Design and Fabrication of Automated Indoor Plant Watering and Monitoring System. Final Year Project (Other), Tunku Abdul Rahman University College.

Wong, Kok Fai (2011) Design and Fabricate Light Weight Sports Car Integration of Components and Parts Weight Distribution. Final Year Project (Other), Tunku Abdul Rahman University College.

Wong, Lok Yen (2022) Aerodynamic Analysis and Optimization of Capsule Travelling in a Confined Tube with 3-D CFD Simulation. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Wong, Mun Keat (2019) Path Planning Algorithm for Multiple AGVs. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Wong, Peng Hao (2023) Design of the Mechanized Loose Fruits Collector for Oil Palm Plantation. Final Year Project (Bachelor), Tunku Abdul Rahman University of Management and Technology.

Wong, Qiu Yu (2020) Development of Mobile Monitoring System for Manufacturing Industry. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Wong, Suet Yin (2020) The Design Optimization of an Internal Combustion Engine by using Finite Element Method. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Wong, Theam Choy (2013) Design and Fabrication of an Automated Can Crusher System (Electronic and Programming). Final Year Project (Other), Tunku Abdul Rahman University College.

Wong, Toon Meng (2013) Design and Fabrication of Low Cost Air Purifier (Design). Final Year Project (Other), Tunku Abdul Rahman University College.

Wong, Willy Kiin Chuong (2019) A Study on Optimizing Cutting Parameters to Reduce Surface Roughness in Machining Sus316 Material. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Wong, Yee Lee (2011) Design and Build Lightweight Sport Car (Chassis Design). Final Year Project (Other), Tunku Abdul Rahman University College.

Wong, Yew Lap (2013) Design and Fabrication of An Overhead Conveyor System with PLC (Design and Fabrication). Final Year Project (Other), Tunku Abdul Rahman University College.

Wong, Zi Lik (2018) Feature Extraction for Particle Characterization. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Wong, Zi Qing (2019) Computation of Effect of Speed on Tail- Down Force of an Aircraft during Landing. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Wong, Ziliang (2020) Development of a Real Time Spherical Object Tracking Control System. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Woo, Kah Seng (2018) Design an application of heating, ventilation and air conditioning System (HVAC). Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Y

Yam, Ken Lip (2018) Study of Impedance Matching on Wireless Power Transfer System for Extended Operating Distance. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Yang, Chiew Onn (2011) Design and Fabrication of Vortex Generator (Turbine System). Final Year Project (Other), Tunku Abdul Rahman University College.

Yap, Chin Lun (2013) A Comparison Study on Face Detection and Face Recognition System. Final Year Project (Other), Tunku Abdul Rahman University College.

Yap, Jing Zong (2023) Food Waste Classification Using Artificial Intelligence. Final Year Project (Bachelor), Tunku Abdul Rahman University of Management and Technology.

Yap, Jun Wah (2024) Optimization of Milling Parameters to Reduce Tool Wear on STAVAX Material. Final Year Project (Bachelor), Tunku Abdul Rahman University of Management and Technology.

Yap, Jun Yuen (2011) Design and Simulation of Navigation Light by Using Wave Energy. Final Year Project (Other), Tunku Abdul Rahman University College.

Yap, Jyen Hong (2023) Acoustic Characteristic of Traffic-Sound Barriers in Urban Area through Simulation. Final Year Project (Bachelor), Tunku Abdul Rahman University of Management and Technology.

Yap, Kian Jiunn (2019) Optimization of PID Gain Parameters for Precise Positioning System. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Yap, Kok Chee (2020) Transient Analysis of Air-Puff-Induced Corneal Deformation by Ocular Response Analyzer. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Yap, Zhao Hua (2023) Vibration Analysis of a Sandwich Composite Plate with Honeycomb Core. Final Year Project (Bachelor), Tunku Abdul Rahman University of Management and Technology.

Yeap, Wei Qing (2023) Design and Optimization of Automobile Exhaust Muffler. Final Year Project (Bachelor), Tunku Abdul Rahman University of Management and Technology.

Yee, Choon Sian (2022) Design of Water Filling and Cleaning System for an Air Washer. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Yee, Mun Jun (2022) Correlation between Palm Oil Fruitlet Colour and Oil Yield with a Deep Neural Network. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Yem, Jie (2021) Study of Inverse Kinematics of Six Degree of Freedom Manipulator Using Fabrik. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Yeo, Kee Gim (2020) Design of Light-Weight Leaf Springs For Light-Duty Pickup Trucks. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Yeo, Win Chin (2011) Design and Fabricate Navigation Light by Using Wave Energy. Final Year Project (Other), Tunku Abdul Rahman University College.

Yeoh, Bing Quan (2019) A Study on Evaluating Tool Wear Based On Cutting Parameters in Machining Sus316 Material. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Yeoh, Choon Yip (2017) Design and Fabrication of Motorized Suitcase (Mechanical). Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Yeoh, Tian Woei (2018) Study of Sign Language Recognition System on Mobile Phone. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Yeow, Ming Xuan (2023) Design of Wireless Power Charging Coil for LED Lighting. Final Year Project (Bachelor), Tunku Abdul Rahman University of Management and Technology.

Yin, Han Her (2023) Fan Cooling System Using PLC, HMI and OPC UA. Final Year Project (Other), Tunku Abdul Rahman University College.

Yong, Boon Hann (2020) Evaluation of Cutting-Edge Radius (CER) of a Cutting Tool for Milling of Die Aluminium Casting (DAC) Material to Achieve Optimal Surface Roughness. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Yong, Choon Shiang (2018) Design and Fabrication of Mechanical Foorstep Power Generator. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Yong, Jeremy Yi Jie (2023) Mini Fingerprint Security Lock/Drawer Lock. Final Year Project (Other), Tunku Abdul Rahman University College.

Yong, Shin Kiat (2011) Design and Analysis on Rotor System. Final Year Project (Other), Tunku Abdul Rahman University College.

Yong, Soon Loong (2013) Finger Bending Motion Controlled Electrical Wheel Chair by Using Flexible Bending Sensors. Final Year Project (Other), Tunku Abdul Rahman University College.

Yong, Wai Hou (2017) Design of Reconfigurable Robots to Overcome Obstacles. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Yoong, Kah Chung (2022) Design of Malaysian English Large Vocabulary Continuous Speech Recognizer With Acoustic Model Adaptation. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Yu, Kar Kwi (2011) Design and Construction of a Vacuum Engine (Design and Analysis). Final Year Project (Other), Tunku Abdul Rahman University College.

Z

Zainal Ahmad, Nazri Syazwan (2021) A Study on Optimizing the Cutting Condition and Parameters to Evaluate Surface Roughness in Milling SUS316 Stainless Steel Material. Final Year Project (Bachelor), Tunku Abdul Rahman University College.

Zuzartee, Alden Gregory (2020) Multiphysics Simulation Evaluation of Motion Control of a Soft Robotic Arm. Final Year Project (Bachelor), Tunku Abdul Rahman University College.